Monday, November 29, 2010

Grey-area Suppliers

Aardvaark Industries
     PO Box 35066
     Louisville, KY 40218
     (502) 966-2115
     Exotic chemiclas such as ricin, scopalomine (truth serum), curare,
     cobra & rattlesnake venoms, etc.  Also carries specialized
     laboratory apparatus, glassware, etc.
     Catalog $2.00

Alumni Arts
     Box 553
     Grant's Pass, OR 97526
     Sells perfect reproductions of college diplomas which are no different
     than the real thing, other than the fact that they are 100% phony.
     They are sold as "replacements for lost diplomas."  They have blank
     diplomas for most major colleges & universities in stock, and they do
     excellent lettering (on request) that makes their product look as good
     as diplomas hanging in frames on professional office walls.  Price
     was $40.00.  They will also create custom diplomas according to your
     specifications for $65.00.  Full-color illustrated brochure is $3.00.
     Naturally, these diplomas are not to be used for deceptive or illegal

Amazing Concepts
     Box 716
     Amherst, NH 03031
     (603) 673-4730
     Sells kits for FM xmitters, telephone bugs, phasor thingumabobs, and
     (no kidding) an "invisible pain field generator," which is supposedly
     quite weak & disappointing.  Also known as Information Unlimited and
     Scientific Systems.

American Ballistics Co.
     PO Box 1410
     Marietta, GA 30061
     (404) 434-3078
     Sells special-purpose ammunition, sub-sonic, super-sonic, armor-
     piercing, etc.  Will custom-manuf. ammo to specifications.

     Box 12627
     Charleston, S.C. 29412

BMF Activator Co.
     Manufactures a device which clamps to the trigger guard of semi-
     automatic firearms.  By operating a small hand-crank (much like a
     pencil sharpener), the trigger is operated VERY rapidly.
     Primitive, but it works...  about $35.00.

BNF Enterprises
     PO Box 3357
     Peabody, MA 01960
     (617) 531-5775
     General electronics supplier.  Has a vast selection of surplus parts,
     components, gadgets, etc.  Huge catalog.

Bryg's Inc.
     PO Box 1452
     Lilburn, GA 30247
     (404) 448-9606
     Sells a push-button stilleto, which is carried in a pocket like a pen.
     When the pocket-clip is pressed, a needle-sharp hardened-steel shaft
     springs out from the front of the barrel, locking in place.

Bumble-Bee Wholesale
     1251-3 Oxnard St
     N. Hollywood, CA 91606
     (213) 985-2939
     Barnett crossbows, guns, archery equipment.

C & T Enterprises
     PO Box 18564
     Tuscon, AZ 85731
     Sells M-18 military-type smoke grenades; any color.  Used to sell for
     $18 each.

C.C.P., Inc.
     Suite 125
     900 Old Koenig

     Austin, TX 78756
     (152) 454-2459

     Box 30502R
     Bethseda, MD 20814
     Videocypher II descrambling manual, schematics, video & audio DES,
     cloning, muskateering, EPROM codes (HBO, Cinemax, Showtime, Adult
     $13.95 + $2.00 postage.

Capri Electronics
     Route 1
     Canon, GA 30250
     (404) 376-3712
     Sells scanner accessories, descramblers, bug detectors.

CBC International
     PO Box 31500
     Phoenix, AZ 85046
     Sells tech info, kits, parts for modifications to CB radios, such as
     FM conversion, frequency expansion, linears, etc.

Chemical Service Co.
     Route 7, Box 7184
     Brenham, TX 77833
     Sells potassium chlorate, iodine crystals, aluminum powder, and other
     hard-to-find chemicals, in small quantities at fair prices.
     Full listing $1.00

City News Service
     PO Box 86
     Willow Springs, MO 65793
     (417) 469-2423
     Sells very authentic-looking PRESS ID cards.  Several different
     types, including wallet, clip-on, dashboard signs, window stickers,
     etc.  Prices are fair, quality is excellent.  Reliable.
     Catalog $3.00

Columbia Pacific University
     1415 Third St
     San Rafael, CA 94901
     (415) 459-1650
     College degrees; no studies, state authorized.  Costs about $2600.00.

Cony Mfg. Co.
     Rm 301
     Hirooka Bldg
     No. 59, 2 Chome
     Kangetsu cho
     Chikusa-Ku Nagoya
     464, Japan
     Manuactures a variety of small variable-freq. radio xmitters.  Will
     export to the U.S.

Covert Arms Co.
     PO Drawer 31190
     El Paso, TX 79931
     (915) 594-4077
     Sells a kit for assembling a .22 pen gun. Contains everything but the
     outer tube.  Info is supplied on where to buy the outer tube.
     Assembly is quick & requires no special skills or tools.  ILLEGAL to
     assemble the firearm without the appropriate federal permit.
     Shoots any type of .22 ammo, including magnum.

Criminal Research Products
     206 - 218 East Hector St
     Conshocken, PA 19428
     Handles a large line of general police and investigative equipment,
     including electronic surveillance items.  They have two separate
     catalogs, one for the general public, and one for law-enforcement.
     Genuine law-enforcement officers should specify this fact when
     requesting a catalog, or they'll receive the ORDINARY one.

Deco Industries
     Box 607
     Bedford Hills, NY 10507
     (914) 232-3878
     Kits for miniature FM xmitters, telephone bugs, etc.

Dektor Counter-Intelligence & Security
     515 Barnard St
     Savannah, GA 31401
     Offers professional countermeasures services to the private sector,
     conducts classes and seminars on the subject, and markets a complete
     line of countermeasures equipment, both to the private sector and
     to law enforcement.  Prices are higher than most, but not unreasonable.
     Some knowledge is required to use the equipment effectively.

De Voe
     PO Box 32
     Berlin, PA 15530

     Sells info on making electronic detonators.

     PO Box 60
     Lake Hiawatha, NJ 07034
     An excellent source of information and components for satellite TV
     systems, from complete dish kits to separate parts for homebrew
     systems.  Catalog is $3.00, and contains some good technical info.

Diversified Wholesale Products
     PO Box 1275
     Redondo Beach, CA 90278
     Scrambler phones, bug detectors, ECM, executive & personal protection
     equipment, etc.
     Catalog $3.00

Edge Co., The
     PO Box 826
     Brattleboro, VT 05301
     Knife kits for switchblades, stilletos, and other automatic knives.
     Assembled kits may be ILLEGAL in your area.

Edmund Scientific Co.
     101 E. Gloucester Pike
     Barrington, NJ 08007
     Offers a catalog of science/hobbyist-oriented devices and materials,
     including binoculars, IR viewers, lasers, lenses, and some
     electronics gear.  A well-established, reliable co.

     BP 39 84210 Pernes les Fountaines
     S.A.R.L. RC 77 B 113
     Siret 311 314 785 00016
     Product line not extensive as PK's, but their prices for some items
     are considerably lower.  However, some of the devices they sell are
     made by Cony, and are priced about 300% higher than Cony sells them
     for.  Catalog is in French, and costs $10.00

Excalibur Enterprises
     PO Box 266
     Emmans, PA 18049
     (215) 967-3443
     Night-vision devices, Starlight weapon scopes, etc.
     Informative catalog $5.00.

Freedom Arms
     Box 7072
     Springfield, MO 65801
     Sells info on making plastic explosives, napalm, thermite, etc. for

     PO Box 128
     Kew Gardens, NY 11415
     Sells excellent-quality locksmithing tools & equipment.
     Reasonable prices.
     Catalog $2.00

Guardian Security Products
     4001 East Fanfol
     Phoenix, AZ 85028
     1-800-527-4434 orders
     Electronic stun guns, 90000 volt baton, spray weapons.
     Catalog $1.00

H & W
     PO Box 4
     Whitehall, PA 18052
     Sells genuine human skulls, whole skeletons, arms, legs, etc.
     Everything is clean & in good condition, with no holes.
     A complete listing is avail. for $1.00 and a SASE.

Howell Laboratories
     Box 73
     Folly Beach, SC 29439
     Sells formulas for smoke grenades, fireworks, contact explosives, etc.

Intelligence Group, The
     1324 West Waters Ave
     Lighthouse Point, FL 33064
     Attn: Jerry Ogelsby (Mngr)
     (813) 933-9244
     Specializes in video equipment of all types, including pin-hole lenses,
     ABSCAM investigative equipment, etc.

J & W Electronics, Inc.
     PO Box 800
     Mansfield, MA 02048
     1-800-227-8529 orders
     Cable converters, Macrovision, signal eliminators, snooper stopper
     (which prevents cable co.'s from knowing how many cable converters you

Ju-Ron Company
     3211 W. Rohmann
     Peoria, IL 61604
     Strait-jackets, leg irons, iron neck-collars, slave helmets, leather
     underwear, etc.  All the latest fashions in bondage and restraint
     apparatus.  (Hardware only - you have to come up with your own

K Products
     PO Box 27507
     San Antonio, TX 78227
     Sells ID documents: International drivers' license & other cards,
     custom-made police & security badges, etc.
     Color catalog $1.00

L & M Guns
     1629 Gaylor St
     Smyrna, GA 30080
     (404) 432-6018 or
     (404) 948-7074 Mon thru Sat 10:00 am to 8:00 pm
     Before you read this one, please note that it's ILLEGAL to own or
     omprovise any type of device which is definable as a firearm
     silencer, without proper licensing and authorization, where required.
     Now then...  this company sells an adapter which allows you to use
     an ordinary 2-litre plastic soft-drink bottle to effectively quiet
     the muzzle blast of most firearms, particularly a .22.  It works almost
     as well as a $200 machined device.

Larc International
     PO Box 460
     Maitland, FL 32751
     (305) 339-6699
     Sells a freon-powered BB machine gun.  Shoots 3000 BBs per minute at
     an effective range of about 30 yds.  Uses standard BBs and standard-
     sized cans of freon (avail. at most auto-supply stores).  Price used
     to be about $40.00.  Dangerous; not a toy.

Liberty Industries
     Box 279, Rd 4
     Quakertown, PA 18951
     Offers a fantastic selection of pyrotechnic components & chemicals.
     They specialize in complete kits, consisting of pre-formed tubes,
     end-caps, fuse, and everything else needed to make REAL fireworks.
     They START at the M-60 size and go upward to the quarter-stick and
     full-stick items.  They also have kits for making big aerial gun
     salutes.  May be illegal in some areas.
     12-page catalog $1.00

M.D. Electronics
     115 New York Mall
     Suite 133E
     Omaha NE 68114
     (402) 554-0417 information
     1-800-524-1150 orders
     Cable TV descramblers, cable converters.

Matthews Cutlery
     3845-A N. Druid Hills Rd.
     Decatur, GA 30033
     (404) 636-7923
     Handles over 1000 different knives, tomahawks, etc.
     Catalog $1.50

Matthews Police Supply Co.
     PO Box 1754
     Matthews, NC 28105
     Brass knuckles, lead-loaded sap gloves, etc.

Merrell Scientific Co.
     1665 Buffalo Rd
     Rochester, NY 14624
     (716) 426-1540
     One of the biggest & most well-stocked mail-order chemical suppliers
     in the U.S.  Extremely large selection of high-quality chemicals and
     laboratory apparatus.  Good prices, reliable, professional service.
     Catalog $3.00

MKBS Publications
     4111 Lincoln Blvd
     Marina Del Rey, CA 90291
     Sells info on making explosive bullets, including .22 rimfire.
     Also has other instructional materials on explosives-making
     and related hobbies.

Morris Lawing
     150 Garland Ct
     Charlotte, NC 28202
     Markets a black-powder short rifle which is disguised as a walking-
     Catalog $1.00

Mouser Electronics
     11433 Woodside Ave
     Santee, CA 92071
     (619) 449-2222
     Electronic components, parts, & equip.  Good prices & service.
     Usually has what you can't find elsewhere.

Nuclear Research
     Box 10073
     Springfield, MO 65808
     Astrolite explosives - they claim they're "the most powerful non-
     nuclear explosives ever developed.  More powerful than TNT, C-4,
     plastic, nitroglycerin, or PBXN-1".
     Complete manufacturing instructions $15.00

Ol' Green Giant
     PO Box 62
     Burns, KS 66840
     Offers a prepared, ready-to-use vial of one of the most deadly
     poisons known - nicotine sulfate.  Great for knocking off rats or
     cape buffalo with a blowgun, crossbow, or air-gun dart.  Also sells
     blowguns and survival gear.
     Catalog $0.50

     Rt 1, Box 221
     Blue River, WI 53518
     Potassium nitrate, magnesium, and other chemicals.

Phoenix Systems, Inc.
     PO Box 3339A
     Evergreen, CO 80439
     (303) 674-2653
     M-18 military smoke grenades, riot buster smoke grenades (100000
     cubic feet of HC white smoke), smoke pellets.

PK Electronik
     Heidenkampsweig 74
     2000 Hamburg 1
     West Germany
     Phone 040 249011 (English & German)
     Offers the most complete line of highly-sophisticated electronic
     bugging devices & cloak-&-dagger devices in the world, with prices
     to match.  Prompt service via Air Parcel Post.
     Bi-lingual English/German catalog $25.00 by International Money Order.

     4327-A1 S. Atlanta Rd. S.E.
     Smyrna, GA 30080
     Remember Morris Lawing's black-powder cane gun?  Well, this co. sells
     a conversion kit to make Lawing's cane gun shoot a .38 Special.
     Comes with everything, & screws right in.  ILLEGAL without the proper

Rosedale Chemical Co.
     R. 17, Box 3042
     Rosedale, KS 66103
     1-800-821-5157 (credit card orders)
     Sells an aerosol-type CN tear gas grenade.  Thumb-lock to release and
     toss.  Discharges an impressive amount of CN.  Great for those boring

Sardauker Press
     Box 18644
     Memphis TN 38118
     Sells plans & shop drawings for converting an ordinary Zippo lighter
     to shoot a .22 short (simple machine work).  Finished weapon may still
     be used as a lighter.  This is ILLEGAL to manufacture without an
     appropriate federal license and local permit, if required.
     Complete plans $7.00

Scramble Facts
     (718) 343-0130
     Phone for 3 mins of satellite TV industry news, tech tips, & new
     product info.

Scrambling News
     15552A Hertel Ave
     Buffalo, NY 14216
     (716) 874-2088
     Newsletter with info on Videocipher, cloning, microwave hacking,
     Z-TAC systems, etc.  Monthly subscription $24.95 /yr.
     Product catalog $1.00

     852 W. 1st St
     Birdsboro, PA 19508
     (215) 582-1694
     Sells mechanically-triggered tear-gas expellers for use in booby-traps
     and other similar applications.  Also has electronically-triggered and
     time-delay models.

Shotgun News, The
     Box 669
     Hastings, NE 68901
     Publication devoted to guns, accessories, machine guns, silencers,
     bullets, bombs, knives, bows, crossbows, body armor, gunpowder,
     survivalist gear, military surplus, souveniers, etc., as well as
     ads by gun dealers, manufacturers, wholesalers, and private
     individuals.  Subscription $16.00, 36 issues / yr.

Silent Partners, Inc.
     230 Lafayette St.
     Gretna, LA 70053
     Offers a full line of threat-zoned modular body armor.  This is a
     T-shirt type, bullet-proof material with add-on panels.

Split Second Security, Inc.
     PO Box 16142-G
     Houston, TX 77222
     Sells a holster for mini guns, disguised as a pager.  Fits Davis
     Derringers, Bauer, Browning .25 autos, Freedom Arms .22LR, 1"
     barrel, North American Arms .22LR, 1 1/8".
     $17.95 + $1.50 s&h.  Purchaser must comply with applicable laws.

Steve Arnold's Gunroom
     PO Box 68, Dept 32-1
     Dexter, OR 97431
     (503) 726-6360
     Professional locksmithing tools; picks, tubular lock picks, Schlage
     wafer, books, double-sided tumbler picks, etc.
     Catalog $2.00

Superior Suppressors
     Box 09161
     Detroit, MI 48209
     (313) 581-5016
     Sells a complete kit for making an efficient pistol silencer
     (including tube) that fits the Ruger Mk-1 auto-pistol.  The kit is
     easily finished by simple drilling and hand-filing.  It is legal to
     buy the kit, but ILLEGAL to finish it without a federal permit.  A
     machine shop can do the work for about $10.  The kit sells for
     $100, and reduces the sound of a .22 long rifle to that of a pellet

     Room 603
     147 W. 42 St
     New York, NY 10036
     This is a Times Square mail drop for these folks.  Basically, they are
     anti-telephone co., anti-bureaucracy, technically-oriented, semi-
     radicals who publish a newsletter, which is usually one or two pages
     of technical information on such things as how to rip off pay phones &
     utility companies, cheat the postal service, and other similar ideas.
     A sample newsletter is $1.00, but don't send cash as TAP isn't all that
     reliable about filling orders.

     PO Box 15391
     W. Palm Beach, FL 33416
     Offers international drivers' license, international student ID card,
     Social Security Card, and other documents.  Service is slow,
     quality is good.  Not to be used for deceptive or illegal purposes
     (of course).

Trans-World Cable Co.
     12062 Southwest 117th Court
     Suite 126
     Miami, FL 33186
     Cable TV converters, descramblers, remote controls, accessories.

United Electronic Supply
     PO Box 1206
     Elgin, IL 60121
     (312) 697-0600
     Cable TV accessories, descramblers, remotes, anti-jammer kits.

U.S. Cavalry Store
     1375 N. Wilson Rd
     Radcliff, KY 40160
     Sells a selection of military & paramilitary clothing & gear;
     decorations, edged weapons, survival gear, etc.
     Catalog $3.00

Video & Satellite Marketeer
     PO Box 21026
     Columbus, OH 43221
     (614) 451-6353
     A newsletter for those interested in video, VCR, satellite dishes, etc.
     Has a catalog of a wide variety of recorded tapes, and interesting

Wiley & Sons
     Route 1, Box 86
     Wills Point, TX 75169
     (214) 848-7912
     Tranquilizer guns, darts, & knockout chemicals.

Wynn Engineering
     4327 Aspenglade Dr
     Houston, TX 77064
     Home-made surveillance gear or good to excellent quality.  Good
     Catalog $3.00

Yankee Mfg. Co.
     59 Chase St
     Beverly, MA 01915
     (617) 922-8262
     Smoke bombs, grenades, flare guns, launchers, flash bombs, fuse, etc

The Official National "10 Code" Signal

10-0   =  Caution
     10-1   =  Unable to copy, - change location
     10-2   =  Signals Good
     10-3   =  Stop transmitting
     10-4   =  Acknowledgement, -Roger, -OK
     10-5   =  Relay
     10-6   =  Busy, -Stand by unless urgent
     10-7   =  Out of service
     10-8   =  In service
     10-9   =  Repeat
     10-10  =  Fight in progress
     10-11  =  Dog case
     10-12  =  Stand by
     10-13  =  Weather and road report
     10-14  =  Report of prowler
     10-15  =  Civil disturbance
     10-16  =  Domestic trouble
     10-17  =  Meet complainant
     10-18  =  Complete assignment quickly
     10-19  =  Return to...
     10-20  =  Location
     10-21  =  Call .... By telephone
     10-22  =  Disregard
     10-23  =  Arrived at scene
     10-24  =  Assignment completed
     10-25  =  Report in person to ...  (meet)
     10-26  =  Detaining subject, Expedite
     10-27  =  Drivers license informations
     10-28  =  Vehicle registration informations
     10-29  =  Check records for wanted
     10-30  =  Illegal use of radio
     10-31  =  Crime in progress
     10-32  =  Man with gun
     10-33  =  Emergency
     10-34  =  Riot
     10-35  =  Major crime alert
     10-36  =  Correct time
     10-37  =  Investigate suspicious vehicle
     10-38  =  Stopping suspicious vehicle
     10-39  =  Urgent, use light and sirene
     10-40  =  Silent run, No light nor sirene
     10-41  =  Beginning tour of duty
     10-42  =  Ending tour of duty
     10-43  =  Information
     10-44  =  Request permission to leave patrol ... for ...
     10-45  =  Animal carcass in ... lane at ...
     10-46  =  Assist motorist
     10-47  =  Emergency road repairs needed
     10-48  =  Traffic standard needs repairs
     10-49  =  Traffic light out
     10-50  =  Accident, - F, PI, PD,
     10-51  =  Wrecker needed
     10-52  =  Ambulance needed
     10-53  =  Road blocked
     10-54  =  Livestock on highway
     10-55  =  Intoxicated driver
     10-56  =  Intoxicated pedestrian
     10-57  =  Hit and run, - F, PI, PD,
     10-58  =  Direct traffic
     10-59  =  Convoy or escort
     10-60  =  Squad in vicinity
     10-61  =  Personell in area
     10-62  =  Reply to message
     10-63  =  Prepare to make written copy
     10-64  =  Message for local delivery
     10-65  =  Net message assignment
     10-66  =  Message cancellation
     10-67  =  Clear to read net message
     10-68  =  Dispatch information
     10-69  =  Message received
     10-70  =  Fire alarm
     10-71  =  Advice natur of fire
     10-72  =  Report progress on fire
     10-73  =  Smoke report
     10-74  =  Negative
     10-75  =  In contact with
     10-76  =  En route
     10-77  =  ETA, Estimated time of arrival
     10-78  =  Need assistance
     10-79  =  Notify corroner
     10-80  =  Chase in progress
     10-81  =  Breathalyzer report
     10-82  =  Reserve lodging
     10-83  =  Work school xing at ...
     10-84  =  If meeting ... advice ETA
     10-85  =  Delayed due to ....
     10-86  =  Officer operator on duty
     10-87  =  Pick up checks for distribution
     10-88  =  Advice present telephone number of ...
     10-89  =  Bomb threat
     10-90  =  Bank alarm at ...
     10-91  =  Pick up prisoner subject
     10-92  =  Improperly parked vehicle
     10-93  =  Blockade
     10-94  =  Drag racing
     10-95  =  Prisoner / subject in custody
     10-96  =  Mental subject
     10-97  =  Check signal, Test
     10-98  =  Prison or Jail break
     10-99  =  Records indicate anted or stolen

Wednesday, November 17, 2010

Your Rights and What to do Upon Arrest

You've been arrested, or someone you know has been arrested.  Don't
    assume  that  it  can't  happen  to  you; the ease by which one can get
    arrested is amazing. Many people believe  that  if  they  "explain  the
    situation"  or tell their side of the story to the police, they will be
    let go, or at least things will go easier on them if they  "cooperate".
    Nothing could be further from the truth.

        Perhaps  you  or  the  person  arrested feel that you were unjustly
    arrested because you are innocent.  Obviously,  the  arrest  would  not
    have  taken  place if the police agreed with you.  It is the job of the
    police to get as much information from you in  order  to  convict  you.
    Many  police  officers  consider  themselves  to  be  a  combination of
    prosecutor, judge and jury, and they will do their best to confuse you,
    intimidate you and to get information from you that will  convict  you.
    And  when  your  trial  finally  occurs, it is far from uncommon to see
    police officers lie in court in order to  convict  you.   You  will  be
    stunned to find out what you supposedly told them.

        About  90%  of  all  convictions  are primarily based upon evidence
    elicited from the person arrested.  Therefore, what you do or say  upon
    arrest is absolutely crucial as to whether you are convicted or not.

        When  you  have  been  arrested,  you will be invited to "tell your
    side of the story." Don't feel that you can just  because  your  rights
    haven't  been  read  to  you.  Do  not  be  tempted  to tell the police
    anything.  Don't try to lie.   Give  the  police  your  name,  address,
    etc., and don't try to use an alias or some other name than your . When
    you  are questioned about anything else, POLITELY insist upon having an
    attorney present.  Ask politely for a telephone.  Often,  you  will  be
    told  that you will be permitted to make a telephone call "after we are
    finished." Simply state politely t you  will  not  discuss  any  matter
    without first consulting an attorney. If you cannot afford an attorney,
    it  does  not  matter.   One  can  be  appointed  for  you, or a public
    defender can be appointed.  Again, politely ask to  make  phone  calls.
    If  the police continue to try to question you, constantly, constantly,
    constantly politely ask for an attorney.  Insist that you  will  answer
    no questions without an attorney.

        There  are  several  police  techniques that you should know about.
    One is called the "Mutt and Jeff" technique, and is the  most  commonly
    used.  In  this  situation,  one of the police officers will act as the
    "tough guy." He might put a gun to your face and  tell  you  that  he'd
    like  to  blow  you  away.  He may call you every name in the book, and
    physically abuse you.  They tell you how you are going  to  ja  hreaten
    you  with  deportation (if you are an immigrant), swear at you, and use
    every technique you can think of to intimidate  you.   Then  the  other
    police  officer approaches you.  He is "Mr. Nice Guy".  Maybe he offers
    you coffee or food, or a cigarette e tells you how bad  the  other  guy
    is,  and  that he wants to help you. Then he tells you that if you tell
    him "what really happened", he can get that "tough  guy"  off  of  your
    back.   He  genuinely  seems  to  sympathize  with  you and seems to be
    concerned about situation.  Don't fall for it.   Politely  refuse,  and
    ask to see an attorney.

        Yet  another  technique  of  police questioning is to tell you that
    the person you were arrested with has confessed to the crime,  or  that
    you  have  been identified by witnesses.  Sometimes the person arrested
    is placed in the same room as the person  t  arrested  with,  and  that
    person  DOES  confess.   Don't  let  that  shake you.  Say nothing, and
    politely refuse comment, and insist upon seeing an attorney.

        If the charge is fairly serious, the arrested is often taken to  an
    "interrogation   room".   The  room  is  intimidating  and  depressing.
    Usually, there are no windows, and the  furniture  will  be  stark.   A
    wooden  table, wooden chairs without arms, and the room will be painted
    pea green or gray.   Often  there  is  a  small  bath  with  a  mirror.
    Sometimes  it is a two-way mirror.  An officer or detective will sit on
    either side of you, and your  back  will  be  to  the  door.   Politely
    refuse  to answer any questions, and ask for an attorney.  They will be
    persistent.  Don't scream th yo ur rights haven't  been  read  to  you.
    Simply  politely ask for an attorney, and say NOTHING.  If an assistant
    state's attorney comes in, remember that he or she is a  prosecutor,and
    will  also  be  there  to  elicit information to convict you.  Politely
    refus nd ask for an attorney.

        People seem to believe that you are permitted only one  phone  call
    from  a  police station.  That comes from movies.  Police may even tell
    you that you have only one phone call.  You  may  make  as  many  phone
    calls  as  is  reasonable.   Your primary objectives are: (1) to get an
    attorney, and (2) to get the bail money required, i il has been set. If
    bail hasn't been set, then you will be going to court  fairly  soon  to
    PHONE. The police may want you to enter what is known as  a  "line-up",
    where  you  and  sever  th  ers  are  placed  in a line for purposes of
    identification by alleged witnesses.  Or you might  be  invited  for  a
    "show-up",  where  a  witness  is asked to identify you on a one-on-one
    basis.  Politely refuse, but  do  not  attempt  to  physically  resist.
    Insist  upon an attorney being present.  If you are ignored, attempt to
    pay attention to police conversations with the  witnesses  and  attempt
    to  mentally note the physical descriptions, including clothing, of the
    others in the "line- with you.  Remember, make known your desire for an
    attorney, but do not physically resist.

        If you receive a phone call from someone  who  has  been  arrested,
    tell  them  to:  (1)  Say  nothing  to  the  police,  (2) object to any
    questioning by the police without an attorney present, and  (3)  to  be
    polite  at  all  times.   Ask them what the bail amount is, and if they
    don't know, ask to speak to someone who does.  If  bond  hasn  een  set
    yet,  find out when bond court is, and try to get family and friends to
    go.  Tell the accused that you will get them all the help you can  get.
    Get  phone numbers of relatives and friends.  Tell the accused that you
    will attempt to get an attorn an d do so.   Don't  forget,  an  accused
    person  in  custody  is the loneliest and most frightened person in the
    world.  They are surrounded by police officers, and you  are  the  only
    person who can give them moral support, and to give them resolve.

        The  police know that the arrested is frightened and lonely.  Don't
    wait until "your rights are  read"  before  exercising  them.   Somehow
    rights,  if read at all, tend to be read after the police have elicited
    the information  they  want.   Then  it's  too  late.   At  trial,  the
    policeman  will  testify  that  your  rights  were  read BEFORE you the

        When you have been arrested, it is not wise to start yelling  about
    your  civil  rights.   Lights  go out, treatment becomes worse, and you
    will be considered a trouble-maker.  Be polite at all times, and if you
    are questioned, politely ask to see an attorney.  Then ask the  officer
    about  his  family, or ask about what the officer thinks about a recent
    sporting event.  It certainly doesn't hurt if the officer e ually  gets
    to  like you even though you won't answer his questions.  Don't forget,
    you have the right to an attorney whether or not you can afford one.

        If bond hasn't been set, and you or the arrested is  scheduled  for
    bond  court, get as many friends and relatives there as possible.  When
    the arrested comes from the  lock-up  area,  nothing  helps  more  than
    seeing  familiar  faces.  Even more importantly, the judge setting bond
    is impressed because friends and family in the  courtroom  shows  roots
    in  the  community,  and the bond set will be lower. If you are a le in
    your community, or are a  person  that  an  arrested  might  call,  you
    should  have  the  office  and  home  phone  numbers  of  at least five
    criminal defense attorneys.  Arrests tend to occur during  the  evening
    and  early  morning  hours,  so  having  home  phone  numb o f criminal
    attorneys is crucial.

        Additionally, make sure that you don't discuss your case with  your
    cell-mates.   It  is  not  at  all  unusual  that a cell-mate will tell
    police what you said in order  to  get  their  own  situation  reduced.
    Again,  be  polite,  but tell a cell-mate nothing.  And don't listen to
    their advice, regardless of how experienced they s to be.

        Remember, what happens in  the  twenty-four  to  forty-eight  hours
    after  arrest  is absolutely crucial.  Don't discuss your case with the
    police, insist upon an attorney, and be polite at all  times.   If  you
    are  contacted  by  an  arrested  person, give him or her the preceding
    advice.  Tell the arrested that you will attempt to  an  attorney,  and
    will  try  to  arrange bond money, or to have relatives in court at the
    bond hearing.  Get phone numbers of relatives and friends, and  do  not
    discuss  the  case  with the arrested, and tell them not to discuss the
    case with anybody except a tt orney for  them.   Support  the  arrested
    emotionally as much as possible.

Don't Talk to the Cops

By Robert W. Zeuner, Member of the New York State Bar

       "GOOD MORNING! My name is investigator Holmes. Do you mind answering a few
simple questions?" If you open your door one day and are greeted with those 
words, STOP AND THINK! Whether it is the local police or the FBI at your door,
you have certain legal rights of which you ought to be aware before you
proceed any further.
        In the first place, when law enforcement authorities come to see you,
there are no "simple questions". Unless they are investigating a traffic 
accident, you can be sure that they want information about somebody. And that
somebody may be you!
        Rule number one to remember when confronted by the authorities is that
there is no law requiring you to talk with the police, the FBI, or the
representative of any other investigative agency. Even the simplest questions
may be loaded and the seemingly harmless bits of information which you 
volunteer may later become vital links in a chain of circumstantial evidence
against you or a friend.
        Such an invitation not only gives him the opportunity to look around
for clues to your lifestyle, friends, reading material, etc., but also tends
to prolong the conversation. The longer the conversation, the more chance
there is for a skill investigator to find out what he wants to know.
        Many times a police officer will ask you to accompany him to the 
police station to answer a few questions. In that case, simply thank him for
the invitation and indicate that you are not disposed to accept it at this 
time. Often the authorities simply want to photograph a person for 
identification purposes, a procedure which is easily accomplished by placing
him in a private room with a two-way mirror at the station, asking him a few
innocent questions, and then releasing him.
        If the investigator becomes angry at your failure to cooperate and
threatens you with arrest, stand firm. He cannot legally place you under 
arrest or enter your home without a warrent signed by a judge. If he indicates
that he has such a warrent, ask to see it. A person under arrest, or located
on premises to be searched, generally must be shown a warrent if he requests
it and must be given to chance to read it.
        Without a warrent, an officer depends solely upon your helpfulness to 
obtain the information he wants. So, unless you are quite sure of yourself, 
don't be helpful.
        Probably the wisest approach to take to a persistant investigator is
simply to say: "I'm quite busy now. If you have any questions that you feel I
can answer, I'd be happy to listen to them in my lawyer's office. Goodbye!"
        Talk is cheap. When that talk involves the law enforcement
authorities, it may cost you, or someone close to you, dearly.

                This info came from a leaflet that was printed as a public
                service by individuals concerned with the growing role of
                authoritarianism and police power in our society. Please
                feel free to copy or republish.

        This info also applies to dealing with private investigators, and
        corporate security agents.

A Note on Drug Tests

Obviously, your best bet is to be drug free at the time of the test.
I would recommend two months of drug abstinence before the drug test.
Drug retention periods are as follows:

Compound                       Approx. Retention
Amphetamines                   20-25 days
Barbituates                    10-14 days
Cocaine                        2-4 days
Ethyl Alcohol                  1-2 days
LSD                            20-40 days
Marijuana                      14-30 days
Methaqualone                   14-21 days
Opiates                        10-14 days
Phenocyclidine (PCP)           10-14 days

Note: Length of retention varies because of many factors, including body
weight, metabolism, body fat ratio, and the quantity and concentration
of the drug.

   Given the above information, you may find yourself in need of a way to
beat drug testing other than 2 months of abstinence.  First off, water
is your best friend.  Drink a LOT of it.  Secondly, purge your system.
Urinate as often as you can before the actual test.  The first urine
of the day contains the highest concentration of contaminant particles.
Some people can't "go" with someone watching.  The testers, to speed up
excretion, might encourage you to drink as much water as you can.  DO IT!
Thirdly, adjust your sleep cycle.  Getting up earlier will let you squeeze
in more trips to the bathroom before the test.  If necessary, stay up all
night and drink water.  Fourthly, use your glands.  A good sauna flushes
out impurities through sweat.  THC and other metabolites are retained
in fatty tissues.  Any exercise to reduce body fat may help you beat
the test.
   Intense watering does not hide the presence of any illicit substance.
You are aiming to dilute all traces to a level below the cutoff point
needed for a positive result.  This is mandatory, elementary defense.

The Consent Form:
   To protect themselves from lawsuits, testers will ask you to sign a
urinalysis consent form.  It will ask you to list the drugs you've taken
in the past week.  Cross out the word "week" and write in "month."  If
the supervisor screams at you, just tell him you read an article that
said an over-the-counter drug you took for the flu three weeks ago could
show up.  Now for the drugs.  For almost every illegal drug there is an
OTC drug that tests positive.  Here is a list of cross-reacting drugs that
you should list on the consent form:

Drug/Metabolite              Cross-Reactive
Amphetetamine                OTC cold medicines, such as Nyquil,
                             Vicks Nasal Spray, Sudafed, Neosynephren, etc.
Barbiturate                  Rarely prescribed compounds... you're hosed
Cannaboids                   Ibuprofen (Advil, Nuprin, Motrin, Mydol)
Cocaine                      Amoxicillin (unconfirmed)
Methaqualone                 None reported to date
Morphine                     Codeine (in any prescription form)
                             Poppy seeds
Doxylamine                   OTC antihistamines and sleeping pills
Phencyclidine (PCP)          Dextromethororphan (found in some
                             prescription cough medicines)
                             Diazepam (Valium)
LSD                          None reported to date

The Testing Procedure:

   Learn what test is being used.  There are three that are quite
common.  The EMIT, Abuscreen (RIA), and ToxiLab (TLC).  If you find out
they are doing Gas-Chromatography/Mass-Spectrometry (GC/MS), then you
are totally screwed.  The GC/MS is the chemical equivalent of finding
a needle in a haystack.  It finds EVERYTHING and is IMPOSSIBLE to cheat
on.  Fortunately, GC/MS is VERY expensive, and it is only used for
confirmation tests.  Don't worry about it. 
   The EMIT test does NOT scan for LSD, RIA does.  If you use ethyl
alcohol or barbituates, RIA does not scan for them, but EMIT does.
Also, nothing currently scans for Ecstasy, Psylocybin, mescaline,
or nicotine.
   If you are in the military, you are going to be tested with RIA.
The majority of federal agencies screen with EMIT.  Private sector
companies split between EMIT and TLC.  No problem.... all are about
equally beatable. 

Slight of Hand:

   Something like 5% of the public finds it impossible to urinate with
somebody nearby.  More find it difficult to void under direct observation.
It's a documented medical condition, known as "blushing kidneys."
Although a minority are afflicted, who is to say you're not one of them?
A doctor's note or plaintive insistence of "Please, I can't do it if you're
watching" will do wonders for insuring privacy.
   Be creative when you're in the bathroom.  Use your body to disrupt
line-of-sight observance.  Hand placement can conceal a lot of activity,
but block with anything else that's available.  Males might say they only
urinate sitting down.  Like a good magician, distract the observer.  Ask
them to run the faucet; say that the sound of running water coaxes your
own activity.  Practice, practice, practice!
   Observers, though they may not show it, are embarrassed as you are.
The longer you take to urinate, the longer the line behind you grows.
Apply enough pressure and they'll give you the latitude you need to
perform your little alchemy.
   Why all the contortion?  Because you want to make some subtle
substitutions, replacing your urine with clean stuff.

Warm and Dry:

   Assume a temperature reading will be taken from the specimen.  Don't
swap an ice-cold brew for tepid pee.  The standard temperature that
they're looking for is between 90.5 and 99.8 degrees Fahrenheit.
   Getting pure urine is the first step to making an effective
substitution.  Know your source.  A relative, a minister, an infant,
anyone that can be counted on for "clean" urine should be tapped.
The sample should be as fresh as possible.  If you need to keep it a few
days before the switcheroo, stick it in the refrigerator.  After a two
month period of drug abstinence, you can make your own samples galore
and freeze them indefinitely in plastic baggies until needed.
   WARNING!!  Do not substitute animal urine, or make urine from food
coloring and water.  They are easily detected.

Houdini in the Washroom:

   The substitute urine is clean and warm.  Now you need a device to
get it into the bathroom.  At a pharmacy, purchase a Bard Dispoz-a-Bag
Drainage Bag or other similar product made for temporary use by
ambulant patients.  Cost, under $4.00.  They come in different sizes.
In our trials, the large leg bag worked best because the extra volume
and shape allowed for a flatter distribution along the midsection where
you'll be wearing it.  It has a short tube and cap, but you can add a short
piece of rubber tubing and a valve for easy filling.

   When a test is imminent, fill and seal the bag with clean urine.
Squeeze all of the air out, seal, and put it on - remembering that
it can't withstand more than eighteen hours at room temperature.
So if the test doesn't go down, take the bag home and put it back in
the fridge or freezer.  You can repeat this as many times as needed.
   Here's the correct procedure for concealing the bag.  Pull down
your skirt or pants.  Secure the bag to your abdomen, exposing as much
of the latex to your skin as possible.  The more surface area taken up,
the flatter the bag will lie, and the better concealed it will be.
Using the abdomen, not the leg, will let gravity do its thing.  Tape
it in place.  If you don't want to tape it to your body, it might rest
easy if you wear panties or jockey shorts.  Women shouldn't push it inside
panty hose because when you take them off to pee, it'll fall out, unless
you cut a pee hole for the hose.  You can also purchase incontinence pants
for about ten dollars.  These give a firm fit, additional warmth, and
need no tape.  If you need, buy a spool of surgical tape.
   Now, snake the output tube from the bag to your crotch.  The tube
and the on/off cap should be within easy reach, but hidden from sight.
It should also feel comfortable - strange at first, but comfortable.
After a few hours, you'll forget about it.  When the time comes for you
to "urinate", discreetly reach into your clothing, locate and turn on
the release valve, or take off the cap.  The "clean" urine will empty
into the jar, apparently your own product.  When the bag is empty, or
you feel you have given enough, turn off the supply, zip up, shake your
read end, and smile.  A few drops on your shoe or the seat adds a measure
of authenticity.
   This method works well for two reasons.  First, urine observers are
on the outlook for bulk - glass jars, things concealed in pockets, and
so forth.  While someone will occasionally ask you to remove a coat,
frisks and strip searches are verboten.  And someone would have to get
awfully close to see the small hose at work.  Men standing with their
backs to the observers and women sitting with their skirts up are
shields enough.  The drainage bag is form-fitting, especially when
taped flat.  No one but you knows it's there.  Second, your
abdomen serves as a heating pad, radiating body warmth directly
to the sample.  In an hour the bag will be near enough to body
   As good as the bag trick is, it may not be right for everyone.
A good variation.  Purchase a few reservoir-tipped condoms (non-
lubricated, please).  Fill one, pull a second over it (to prevent
bursts), and tape it as close to your crotch as possible.  When the
time comes to urinate, with a presharpened fingernail, puncture the
reservoir tip, and go with the flow. 

   Women have an anatomical advantage, the option of inserting a
urine-filled condom within the vagina.  Again, use sharpened
fingernails or a concealed pin to get things flowing.  Even at extra-
close range, it's virtually impossible to tell the source of the yellow
stream.  These techniques should be tried and perfected at home.  Novices
should use water in their dry runs.


   Diluting urine in the specimen jar is invariably more effective than
diluting it in your bladder.  In fact, dilution was so rampant that
Edwin Meese ordered all federal toilets filled with blue dye before
a urinalysis.  The toilet was one source of dilution the urine cops
hadn't thought of earlier.
   If a surprise urinalysis is forced on you, don't panic.  You're in
luck if you're looking into clear water.  Dip the specimen cup and
fill half full of toilet water.  Dry the outside.  Fill the rest with
your own urine and shake.  Rub the jar with your hands to warm.
Presto, the sample should be dilute enough to fall below the cutoff
   Complete privacy means opportunity galore.  Rinse and fill the
specimen jar with hot water to increase the temperature; then dump
it clean.  Never use scalding water, since that may put it outside
the acceptable temperature range and could even crack a thick,
cold container.  Don't be alarmed if you don't have a thermometer.
Your finger is a reliable dipstick.
   Although the Health and Human Services Administration insists
that toilets be dyed blue, low-level sources inside government
washrooms assure us that in most cases the dye is dumped only
in the bowl, leaving you fresh, clear water in the tank.  Avail
yourself of the porcelain oasis.  But be careful - removing the
tank-top makes a lot of noise.  And don't flush if you are ordered
not to.  the thin copper or plastic spout in the tank contains fresh
water.  Push down on the big float to activate the fresh-water spout.
Avail yourself.  Take that, Blue Water Meanies!
   If you're a moderate drug user, or your last use wasn't last night,
as little as one third cup of water can make all the difference between
negative and positive results.  Conceal water in your mouth, in a rubber
between your legs or under your arms.  Be resourceful.  Don't use spit!
Saliva contains some tell-tale metabolites.

Color Bias:

   Although the color of urine varies from person to person and hour
to hour (depending on diet, metabolism, etc., it is nearly always
yellow), there is an unconscious Enforcer bias that rich yellow urine
is the real thing.  Dilution diminishes the color, so it's
semi-important to compensate.  No problem.  Taking vitamin C capsules
will give your urine a darker shade of yellow.  When you then dilute it,
it will balance back to innocent mellow yellow.  The vitamins increase
the odor, which also compensates for the added water.

Chemical Additives:

   Three tablespoons of iodized salt dumped into the sample and
quickly stirred will deceive EMIT tests for ALL substances.  The
salt, and electrolyte, increases the conductivity of the specimen,
and makes it harder for the binding reagents to find their target
metabolites.  Just make sure all of the salt goes into solution.
There's nothing more incriminating than a small pile of insoluble
salt at the bottom of the jar.  One quarter cup of hydrogen peroxide
will also work, as will 3-4 tablespoons of concentrated ammonia or
chlorine bleach.

That about does it.  This information all came from the book
"Steal this Urine Test" by Abbie Hoffman.  I highly recommend this
book for further details.  While I provided the majority of the
"how to beat the test" type info, he goes into the legality of
drug testing, etc.  Best of luck beating the bladder cops!

Tuesday, November 16, 2010

Marijuana and Farming

You will discover, growing your own is not just a cheap way of getting it. 
You also ensure you are smoking ONLY pot, and obtain a great deal of 
satisfaction from watching your plants grow from a tiny seed to a six-foot 
tall monster. It also does wonders for the balance of world trade.

You may have tried to grow hemp plants before, usually just by bunging a few 
seeds in a flower pot on the windowsill and crossing your fingers. You 
probably got an anaemic thin plant about 2-3 feet tall which probably gave you 
a mild buzz. This book tells you how to grow 'em a little bigger than that, 
and how to increase the yield of the end result by two to four times.

An indoor garden will produce about 16 ounces of grass every six months. The 
gardens are really quite simple to build, the only technical knowledge being 
the wiring of a fluorescent tube. Basically, you just hang a fluorescent light 
that can be raised and lowered over some pots with a good soil mixture. All 
the materials you need are available at nurseries, garden shops and DIY 

Homegrown grass is bright green, and tastes pure and clean. Once you have 
experienced the pleasure of working with nature and enjoying clean, clear 
highs, we doubt that you'll ever want to buy commercial grass again. If you 
really want hash oil or resin, you can follow the method in a book called "Dr 
Atomic" - soon to be plagarised, but there's nothing wrong with straight 
grass. After all, it isn't costing you much.

Marijuana is an especially rewarding plant to cultivate because it is one of 
the fastest growing and most responsive plants. The Hemp plant (Cannabis 
Satavia) is highly adaptive and grown all round the world. Under optimum 
conditions, it may grow up to twenty feet high. If you're growing it outdoors, 
make sure you have a very high fence !

Such giants usually grow in tropical and semi-tropical zones, where they 
flourish in the strong sunlight. There are male and female plants as well as 
hermaphrodites (that's male and female parts on the same plant).


The Indoor Garden

Under artificial light, marijuana grows very fast; about 3-6 feet in three 
months. As you want the lights fairly close to the plants, you must arrange 
the lights so that their height can be altered. Hang the fixtures by a rope or 
chain from the walls or ceiling, or from the top of a frame at least 6 feet 
high, constructed of 2" X 2"s. The bar for hanging clothes on in a wardrobe 
works quite well if it is high enough. Try to obtain an industrial type light 
fixture with a built-in reflector, so that no light is lost. If your fixtures 
are not equipped with reflectors, mount them on a sheet of white painted 
plywood, make a reflector from white posterboard, or (at a pinch) sheets of 
white cartridge paper. Don't use aluminium foil (see later).

Ten watts of tube power for each square foot of growing area is adequate for 
healthy growth, but for a fast growing, lush crop, use at least 20 watts per 
square foot. The size and shape of your garden should correspond to the light 
system, so if the garden is 1 X 4 feet, use 2 four-foot tubes (80 watts). If 
the garden is 8 X 2 feet, use 4 eight-foot tubes. One eight -foot tube emits 
more light than 2 four-foot tubes, so try to use as few tubes as possible. 
Marijuana can absorb up to 80 watts per square foot. Increasing the amount of 
light will increase the growth rate, and the quality of your plants.

The garden should be surrounded by reflective surfaces to contain all of the 
light. This will increase the efficiency of the lighting significantly and the 
light will be nearly uniform throughout out the garden until the fixtures are 
more than 2 feet high. A flat white paint is a better reflecting surface that 
aluminium foil or glossy white paint. Flat white has about the same reflecting 
capacity as aluminium foil, but reflects the light more uniformly. Paint walls 
flat white, and hang posterboard, white plastic curtain, thick white paper 
etc. on any open sides from the top of the fixture or frame. Sticking white 
card over the inside of your wardrobe is fine if you can find the white card 
for free. If your reflectors are the only enclosure for your plants, make them 
waterproof, and they will insure a healthy humidity by containing moisture 
evaporating from the soil and transpired by the plants.

Don't rely on training pets to stay out of the garden. Cats know damn well 
what the stuff is, and they may chew the leaves or consume the best parts of 
several plants. Dogs aren't much better either. Scratching in soil is in and 
animals' nature. After all, look at all that time you spent teaching Tibbles 
to use the litter tray. One moment of weakness can destroy months of work (see 
"cuttings" in case of dire emergency). If the garden is accessible to pets, 
surround it with chicken wire or heavy plastic. Ironmongers sell plastic on 
rolls, and inexpensive plastic dropcloths. Cover the floor with plastic too. 
It will protect your floor (and, if you're in a flat, your neighbours ceiling) 
from possible water damage.  The last thing you want is the council sniffing 
around for leaks !

Artificial Light

The most effective and efficient artificial light for plant growth is 
fluorescent light. There now follows a (very) brief physics lesson: The white 
light you see emitted by a fluorescent bulb consists of all the colours of the 
spectrum. The designation - Daylight, Warm White, Gro-lux, Optima, etc. - give 
a heavy clue to what particular combination of bits of the spectrum each bulb 
generates. Plants respond primarily to red and blue light, and for healthy 
growth, a combination of these two colours must be provided. Blue light 
stimulates leaf growth, produces short, stocky stems, and encourages robust 
development. Red light is used for stem and root growth, and to promote 

The best fluorescent tubes are those that are specifically manufactured to 
give out light useful to plants, and have a distinct purple hue. Some of these 
are the Standard Gro-lux, Wide Spectrum Gro-lux, and plant Gro.

Sizes suitable for growing marijuana are 4,6, and 8 feet long. Regular 
wattages for all of these tubes are about 10 watts for each foot of their 
length (80 watts for an eight-foot tube). They also come in higher wattage 
sizes. These are Power Twists, High Output (HO) and Very High Output (VHO) 
tubes, the largest being a 215 watt, eight-foot tube. These high output tubes 
are not always available, and tend to come a little on the expensive side. You 
only really need to use them in an exceptionally large garden.

Regular fluorescent tubes can be used if you can't get Gro-tubes. They don't 
work quite as well, but they will grow a perfectly healthy crop, and usually 
work out more than a little cheaper. Daylight, or Cool White tubes can be used 
in conjunction with either Natural White or traditional (plug-in) bulbs.

Normal bulbs and Natural White both provide the red component of light, while 
the others tend towards the blue end. Use them in a one to one ratio, evenly 
distributing the red and blue sources. Compared to the fluorescent tube, the 
traditional lightbulb is about one third as efficient, has a much shorter 
life, and can cause problems with it's excess heat. Not only might it scorch 
your plants, it could set the whole house up if you haven't supported the 
lights properly. But think what a wonderful time the fire-brigade would have 

Pots and Containers

Plants can be started in flower pots, milk crates, institutional size tin 
cans, polystyrene packaging, plastic jugs, or practically any container that 
is waterproof, at least 4" wide, and doesn't mind having a few holes punched 
in the bottom of it for drainage. Grow-bags are suitable, but will need holes 
punched in the bottom for drainage, and will probably need their pH checked.

A single large box has the advantage of giving more room for the roots to 
spread out, but requires a lot more soil and makes moving, lighting and 
rotating the plants impractical.

In it's natural state, marijuana sends down a tap root up to half the length 
of the plant. Apart from the fact that there aren't many three-foot deep plant 
pots about, trying to simulate natural conditions would be impractical in 
terms of weight, space, cost and labour.

The purpose of the soil (not necessarily ordinary dirt) is to provide water 
and nutrients, and to anchor the plant down. With strict attention to proper 
watering and fertilizing techniques, a six-foot plant can be grown in a 
four-inch pot. The plant will, however, grow much better in a series of 
successively larger pots - six to ten inch pots are a good median size, and 
aren't too heavy to move around when necessary.

Use as many pots as you can fit under the lighting system. The pots can always 
be thinned out if the plants become too crowded. Choose pots that are at least 
as wide at the top as the bottom, so that the soil can breath and dry out more 

Wash all cans, crates and pots etc thoroughly to remove any contaminants and/
or insects. Boil clay pots for ten minutes to sterilize them. Some plastic, 
and most clay, utensils can be dampened and put in a microwave for ten minutes 

Soil Preparation

Marijuana grows best in a well-drained sandy soil or loam which is high in 
nitrogen and potash, at least medium in phosphorous, and which contains little 
or no clay. The pH should be between slightly acidic (6.5) and slightly 
alkaline (7.5). If the pH is either too low or too high it will interfere with 
nutrient uptake. The pH is measured on a scale of 0 to 14 with 7.0 assigned as 
neutral. pH is a measure of the relative concentrations of hydroxonium ions 
(H3O+) to hydroxide ions (OH2-). Several varieties of test kits and meters can 
be purchased from garden stores which test the pH and nutrient contents of the 
soil. Litmus paper (purple or blue) can be obtained from some chemists. Many 
agricultural schools or colleges will test soil pH and nutrient contents for a 
nominal fee.

Soil pH is raised to an acceptable level by adding slaked (hydrated) lime, 
limestone and marl. There is no set formula we can give for raising the pH. At 
a low pH it takes less time to raise the level by one point than it does when 
the pH is nearer to neutral (7.0). Sandy soils require less lime than clay 
soils to raise the pH. In general, if the soil tests acid, add 2 cups of 
hydrated lime for each 50 lb bag of soil. On a more modest scale, this works 
out at roughly one tablespoon for every 1 1/2 lbs of soil. Wet the soil 
thoroughly after mixing. Re-test the soil in about 2 weeks, and repeat the 
application until the pH is in an acceptable range. Soil that is too alkaline 
is treated in the same way, but with aluminium sulphate at a rate of 1/2 cup 
per 50 lbs of soil.

If you are digging up your soil, sift it well to remove stones and root clods. 
Bake the soil in a 200 degree centigrade oven for twenty minutes in one-inch 
layers, in a pressure cooker at 15 lbs/sq in pressure, or in a microwave on 
full for ten minutes (make doubley sure there are no foreign particles in it). 
This will destroy any weed seeds, insect eggs and disease organisms in the 

It is, much, much, simpler to buy commercially prepared soils. These are 
usually sterilised (but if the bag has been opened or holed, sterilize again 
anyway) and have a good balance of nutrients. Ask for soil with a neutral pH. 
Some nursery-men (and women) will sell you anything, so check the pH anyway 
and reject any soil for "lime-hating" plants.

We have had good results from some brands using composted seaweed as an 

The consistency and structure of the soil is important for healthy root 
development, drainage and uniform water dispersion. The medium should not cake 
when dry (this rules out John Innes No. 3) and should remain spongy or loose 
when wet. Test the consistency,and adjust it if necessary.

To test the consistency of the soil, lightly moisten some and squeeze it in 
your fist. The ball should crumble easily when touched. Soil consistency can 
be adjusted by adding perlite, vermiculite, sand or kitty litter.

Perlite and vermiculite are inexpensive commercial products which are much 
lighter than sand and are sterile. Vermiculite absorbs and holds water and air 
in its fibre. Perlite traps moisture and air on its irregular surface much 
like sand. Sphagnum or peat moss is often used to adjust soils, but should not 
be used for marijuana as it tends to make the mix acidic. If you have alkaline 
soil to start with though, you might get away with it.

Soils found deficient in nutrient content can be enriched by adding humus 
(decayed organic matter) or fertilizers such as rose food, liquinure etc. 
Humus is acidic and can alter the pH.

Soil-less mixtures are inexpensive and easy to prepare. They work well, are 
neutral in pH and light in weight, but have absolutely no nutrient content. 
They must be carefully fertilized and are not recommended for an inexperienced 
grower. It is all too easy to over- or under-fertilize the plants.

Two tested formulas are:

1) One part perlite or sand to one part vermiculite and 1 tbsp of lime per 
quart of mixture. 

2) One part perlite or sand to one part Jiffy Mix and 1 tbsp of lime per quart 
of mixture.

You can mix three parts of the soil-less mixture to one part cow manure, or 
rely solely on soluble fertilizers when watering.

Simple Guidelines

Some of you who are not familiar with gardening may be a little over-whelmed 
by all this talk of pH, nitrogen etc... so here is a simple uncomplicated 
formula for those of you with no experience with plants:

Buy commercial soil. Avoid brands that have peat in their names, and not just 
because peat is an over-exploited resource. It is very unlikely that a 
commercial soil will be too alkaline for healthy growth, but it may well be 
too acidic. The simplest way to assure yourself your soil is not too acidic,is 
to put a piece of damp blue litmus paper (blue litmus is available from some 
chemists and garden centres) under the surface of the soil. Wait a few minutes 
and then take it out. It will not harm the soil - litmus comes from a lichen.

If the paper turns pink, the soil is acidic and lime must be added. Mix two 
cups of slaked (hydrated) lime, from your garden store, to each 50 lbs of 
soil. Don't add lime if the paper remains blue. If you find yourself asking 
"is this paper pink, purple or just wet ?", then the soil is probably slightly 
acidic and within an acceptable range for healthy growth.

Mix 10 lbs of natural, sterilized fertilizer (usually based on cow manure or 
chickenshit) to each 50 lbs of soil. If you have some aversion to muck, or 
don't like the smell (well rotted manure doesn't smell, by the way) then you 
can use a soluble fertilizer when watering. We use a brand called 
'phostrogen', which seems to work well. By volume, also mix in one part of 
sand, perlite or vermiculite for every three parts of your soil. This helps 
maintain the right soil texture for healthy root growth.

After potting and watering, the mixture should be re-tested in about a 
fortnight if it tested acidic to begin with.

If it is still acidic, add hydrated lime by mixing one tbsp of lime per quart 
of water, the first few times you water. Test your water supply by dipping a 
piece of litmus in plain water to determine if it is influencing your tests.

To pot any of the mixtures, cover the drainage holes with a square of 
newspaper or window screen to prevent soil from running out. Next, put in a 
layer of sand, perlite, vermiculite or kitty litter about one inch deep to 
ensure good drainage. Fill the pots to within 3/4 inch from the top of the pot 
with the soil mixture. Water the pots until the soil is evenly moist, and 
allow the pots to stand for a day or two so that bacteria necessary for 
nutrient uptake can begin to grow and the fertilizers can start to dissolve 
into the soil.

Seeds and Germination

The potency of marijuana is, in part, hereditary. Choose your seeds from the 
best grass available. Different strains grow at different rates. For 
uniformity of growth, take all seeds from the same batch of grass. This will 
help when it comes to lining them up under lights.

Hemp seeds from angling suppliers are very variable in quality and germination 
rate. They are treated, but about one in twenty still manage to sprout. Only 
use those that form sprouts over a centimetre long.

Choose seeds for their size and colour. The large plump ones with good colour, 
black, brown, grey or mottled - have the best chance of germinating. Seeds 
that are old, badly bruised or immature (green or white) are probably not 
viable. If they are all you can get, you'll have to plant a lot of them and 
hope that some exceptional specimens "take".

Seeds are rarely viable after about three years, and should be stored in an 
airtight container. The crisper section in your refrigerator is an ideal 
place; dark and cool. You can get some idea of the viability by placing a seed 
between your thumb and fore-finger. If the seed does not crumble when pressed 
hard, it is probably viable.

Many books recommend that a germination box should be built to start the seeds 
in. This is an extra hassle that is not necessary. Transplanting the seedlings 
from one medium to another often subjects them to transplant shock, which will 
delay growth. With the following procedure you'll not have any problems.

Soak the seeds overnight in a glass of water or in wet towels to give them a 
head start in the water absorbtion stakes. Adding about a teaspoon of 
"Domestos" (double for thin bleaches) to half a pint of water will prevent 
fungus forming on the seeds. It does not harm the seeds in any way, believe 

Poke 5 or 6 holes about 1/4 - 1/2 inch deep and evenly spaced in each pot. 
Place one seed in each hole and cover lightly with soil. Carefully, so as not 
to disturb the seeds, moisten the soil and keep it moist until the seeds have 

If you are using a bulk lot of not very viable seeds, put them in a seed tray 
with 1 1/4" of seed and cutting compost in the bottom. Moisten with a sprayer 
and, as mould from rotting seeds will be a problem, spray with "Benomyl" or 
another fungicide if you know of a better one. Scatter many seeds over the 
surface, sprinkle compost over the top to only just cover the seeds, and 
dampen with water and fungicide. Put an incubator top on, or put it inside a 
clear plastic bag. These precautions are not necessary with good seeds, but 
then the ones you find in bird-seed aren't particularly renowned for their 

The seeds will sprout in three to fourteen days, depending on their variety 
and viability. If you have only a few seeds and want to give them the best 
chance possible, plant them pointed end up. The seedling will then expend the 
least amount of energy breaking through the soil. This is not critical and is 
unnecessary if you have plenty of seeds.

Light System and Germination

Some say that you need to light the seeds during germination. We have found 
that it makes little difference, and that normal daylight and room 
temperatures are fine.

Once the seeds have sprouted, place the light two to six inches above the top 
of the plants and maintain this distance for the duration of growth. The short 
distance between the light and the plant will encourage the seedling to 
develop with a stocky stem rather than a long, fragile one. At some stages the 
plants grow a couple of inches a day, so you may have to adjust the lights 
several times a week. Usually, seeds will sprout 2-7 days after planting. 
Older seeds may take up to 3 weeks.

It is important for the normal development of the plants that they receive a 
regulated day/night cycle. We emphatically recommend that you use an automatic 
electric timer, so that your plants will not suffer from your irregular hours, 
dirty weekends, or forgetfulness. Once the seeds begin to sprout, set the 
timer cycle for 18 hours of light a day, and leave it on this setting for the 
duration of your garden (see the section on Photoperiod).

It is best to set the timer so that your plants are not disturbed by any light 
during their night period. If they are subjected to even a dim light too often 
during the night cycle, the plants' growth pattern may be disrupted and they 
may develop abnormally. If you use a light in the growing area, use a green 
bulb. Plants are not sensitive to the green spectrum.


Plants growing under artificial light have a long photoperiod, and no cloudy 
days, so they grow extremely fast; one and a half feet per month is not 
unusual. This means that the plants will use a lot of water. Since the space 
around your plants is limited, you'll have to water them fairly often. This 
does not mean watering them daily, or keeping the pots saturated. Plants grown 
in a continuously wet soil are slower growing, and probably less potent than 
normal. They often develop stem rot. Allow the pots to go through a wet and 
dry cycle. This will add in nutrient uptake, especially on potassium, and 
aerate the soil. In general, when the soil one inch deep is dry to touch, 
water it enough so that the soil is saturated but not so much that water runs 
out of the drainage holes, carrying away the soils valuable nutrients.

Self-watering plant pots are fine for keeping the plants alive while you go 
off on holiday, but try not to use them in their intended role of keeping the 
soil continuously moist.

If you underwater your plants, they will wilt. Plant cells are kept rigid by 
the pressure of the cell contents (mostly water). With the water gone, they 
collapse. First the bottom leaves droop, and the condition works itself up the 
plant until the top lops over. If a plant wilts, water it immediately, and it 
will recover within a few minutes. This happens so fast you can actually 
follow the movement of the water as it goes up the plant.

There is no way we can tell you exactly how often to water your garden. Light, 
temperature, humidity and the size of the plants and pots are only a few of 
many variables that determine the water uptake.

Try to reach a median. Don't keep the pots constantly moist, and don't wait 
until the plant dries out and keels over. Use some common sense, we have found 
it in some members of the community. A six-foot plant in a four-inch pot will 
have to be saturated almost every day. Large containers (10" width or more) 
should not be watered to saturation, especially if the plants are small. They 
will not dry out quickly enough and will encourage mould. Clay pots are porous 
and "breath". They require more water than plastic or metal pots.

Don't disturb the roots when you water. Water around the stems, not on them. 
Seedlings are likely to fall over if watered roughly. Use a hand sprinkler 
with a fine spray for seedlings. When set on a coarse jet, these sprays are 
invaluable for discouraging cats from sniffing the seedlings.

Use tepid water, it soaks into the soil more easily and will not shock the 
roots. Try to water during the plants morning hours. Water from the top of the 
pot. Refill the watering container then, and leave it ready for next time. Not 
only will it all be ready, but the water will be at room temperature, and most 
of the chlorine will have evaporated (see later).

Water from the top of the pot. If you insist on watering from the bottom with 
trays, place a layer of gravel or pebbles in the trays to ensure drainage. 
Don't let the pots sit in the water until the soil becomes super-saturated. 
This prevents oxygen uptake and the plants will grow poorly.

The tap water in some areas is acidic (sulphurous) or alkaline (limestone) and 
can change the soil pH. If you are in such an area, check the pH every week or 

Tap water in some locales is highly chlorinated. The chlorine does not harm 
the plants, but it can kill the micro-organisms in the soil that are necessary 
to break down nutrients to a form that the plants can use. Allowing 
chlorinated water to stand overnight will eliminate most of the chlorine gas 
and it can then be used safely.


Depending on the viability of the seeds, you will have a germination rate of 
0-100 % and several plants should be growing in each pot. During the second to 
fourth week of growth, the plants will begin to crowd each other. Thin your 
garden so that one plant is left in each container.

The marijuana leaf consists of 3-11 lanceolate shaped blades. These appear 
usually in odd numbers and the number depends on the genetic factors and 
growing conditions; principally the amount of light. The number of blades at 
the early stage is an indication of over-all leafiness at maturity.

To thin your garden, remove any plants with yellow, white or distorted leaves. 
Also remove the less vigorous ones, and those with the sparsest foliage. Leave 
the bushiest and those with the highest number of blades per leaf.

If the plants are close together, cut the unwanted plants at their base : the 
root system can remain in the pot. Otherwise, make sure you do not disturb the 
remaining plants' roots systems when you pull unwanted seedlings. Marijuana is 
very sensitive to that sort of thing.

The tops of these harvested plants will be your first taste of your homegrown 
grass. They will probably give you a mild buzz. The potency of the crop will 
increase considerably as the plants grow older.


If there are any pots without plants, you should transplant a seedlings while 
you are thinning.

First, moisten the soil in the pot from which you will take the plant, and let 
it sit there for a few minutes. Take a spade or a large spoon, fish slice, wok 
scoop or somesuch, and set it between the transplant and the plant that will 
be left to grow. Try to leave at least one inch of space from the spoon to the 
stem. Lever the spoon towards the side of the pot, so as to take up a good 
wedge of soil. Place the transplant in a prepared hole at the same depth that 
it was growing at before. Replace the soil in both pots, and moisten slightly 
to bond the new soil with the original. If carefully done, a wedge of soil can 
be removed intact, so the root system will not be disturbed and the plant will 
survive with little or no transplant shock. Do not fertilize a transplant for 
two weeks, and do not let them wilt.

To prevent drop-off and wilting from shock, you may want to use Rootone or 
Transplantone. These powders, available at garden stores, contain a root 
growth hormone and a fungicide. They are quite safe for our purposes.


Plants grown under artificial light will often need support, especially in the 
early stages of growth. Unlike sunlight on earth, the intensity of artificial 
light diminishes the further the distance from the light source. The plants 
respond accordingly, and try to grow up into the light. Hanging the lights 
higher up than the recommended six inches will further complicate this 
elongation. Too much red light will cause elongation too, so make sure that 
you include a strong blue light if you are using traditional lightbulbs. The 
blue band will ease elongation somewhat, but the heaviest foliage will still 
be on top, and the stem may not be able to support the weight.

Depending on the plant size, pipecleaners, plastic straws, chopsticks or 
standard plant stakes can be used. Set them in the soil and tie the stem to it 
with string or wire twists like those that come with freezer bags. Do not tie 
too tightly around the stem, leave it very loose. Marijuana is a dicot, and 
will grow in girth as well as length. Tying the string too tightly can cut off 
the flow of water and nutrients as the stem grows larger.

Probably the simplest method of support is to take a rigid piece of wire, form 
a 'C' at one end, bend the 'C' at a right angle to the stem, push the straight 
end of the wire into the ground and carefully place the stem inside the 'C'. 
Wire pipe cleaners are ideal for seedlings. With larger plants, coat hangers 
can be straightened out and the same method used on a larger scale.


As the plants grow, they take nutrients from the soil. These nutrients must be 
replaced if the plants are to stay healthy and strong, and to maintain a rapid 
rate of growth. The main elements are nitrogen (N), phosphorous (P) and 
potassium (K). These are the three mystic numbers listed on the sides of 
fertilizer packets: for example, 5-10-5. Calcium, magnesium, sulphur and iron 
are used in much lesser amounts, as are minute quantities of many other 
elements called trace elements or micro-nutrients. Each element affects 
different characteristics in the plant and all are necessary for healthy 

Nitrogen promotes rapid growth, lush foliage and stocky plants. During the 
first few months of growth, marijuana needs a lot of nitrogen. An abundance of 
nitrogen during the early stages will induce more female plants to develop. 
Obviously, there will be more males if there is a shortage of nitrogen.

Phosphorous promotes root growth, and is necessary for healthy flower and seed 
development. When flowering, marijuana uses about twice as much phosphorous as 
it does during normal, vegetative growth.

Potassium regulates the utilisation of the nutrients by the plant. It 
increases the vigour, strengthens stems, improves resistance to diseases, and 
is essential for proper plant metabolism. The plant needs large amounts of 
potassium during all stages of growth.

Calcium aids in the absorbtion of nutrients, neutralises soil acids, and 
destroys some of the toxic compounds produced by the plant.

Testing the soil periodically is the surest way of maintaining a healthy 
growing medium. Soil that tests high in nitrogen and potassium, and medium in 
phosphorous will not have to be fertilized for a while. Soils found deficient 
in one element can be treated with a singe component fertilizer.

When and how often to fertilize depends on the growing medium you started 
with, the size of the pots, the health of the plants, and general growing 
conditions. Normally, small pots (4 to 6 inches) should be fertilized about 
three weeks after sprouting. Fish emulsion (5-2-5, for those who know the 
magic numbers) is a good organic fertilizer. Dilute one teaspoon per gallon of 
water and use each time you water for the first two months, and once every two 
weeks thereafter. Chemical fertilizers such as Rapid-Gro (23-19-17), 
Phostrogen, or Miracle-Gro (15-30-15) can be used in accordance with 
instructions listed for houseplants. Don't use fertilizers recommended for 
"acid-loving plants", and never add solid fertilizers such as cow manure once 
the plants have started. They promote moulds that can do a lot more harm than 

Large pots (10 to 18 inches) need not be fertilized at all if the soil was 
rich in nutrients to begin with.

Soil-less mixtures must be treated with a trace element mixture. Mix one 
tablespoon per gallon of water the first time you water. Every six weeks 
later, water with one teaspoon per gallon. Increase the treatment if the 
plants show any trace-element deficiencies.

You can use any houseplant fertilizer. These also contain trace elements. An 
ideal formulas ratio for producing the most desirable results at each of the 
stages of the plant's life (rapid growth and profuse foliage in the beginning, 
and good development during middle life, with high resin content during 
flowering) is as follows:

N=Nitrogen, P=Phosphorous, K=Potassium

    N  P  K
Start (2nd week)  20:5:15
2 months before flowering 10:5:15
During flowering  5:12:10

It is not necessary to fertilize in these ratios, only that the plants receive 
enough of each element.

Use one tablespoon of micro-nutrient mix to each gallon of water during the 
first week, and thereafter use once every six weeks.

One week after sprouting, water with fertilizer in dilutions recommended on 
packages for large bushes and tomatoes. Repeat this application in the third, 
fifth, and eighth weeks. Thereafter, fertilize in dilutions recommended for 
houseplants once every two weeks until flowering starts.

Some words of caution: Many people, in an effort to do the best for their 
plants, actually do the worst. Over-fertilizing will put excessive amounts of 
soluble substances into the soil. They interfere with normal nutritional 
processes and will cause poor growth and, in some cases, kill the plant.

For example, too much nitrogen will nitrify the soil and change its osmotic 
properties. Instead of moisture being drawn into the plant, it is drawn away 
and the plant dehydrates. In the limited area that your plant is occupying, it 
is easy to overfertilize. If the plant looks healthy, and is growing well, 
don't be anxious to fertilize. It is better that they are underfed rather than 
overfed. Underfeeding can be recognised and corrected, but with 
overfertilization, you must start another crop and replace or leach the soil 
mix. It is better to use a diluted solution more often than to give one large 
dose once a month.

Foliar feeding (spraying the leaves with fertilizer) is a good way to assure 
the plants their nutrients without building up soluble substances in the soil. 
After the first month, foliar feed the plants with fish emulsion or the 
chemical fertilizers. Some of the chemical fertilizers are not recommended for 
foliar feeding houseplants. Marijuana is not a houseplant. As long as the 
fertilizer can be used for foliar feeding, use it on your plant. Use a fine 
mist sprayer, they don't cost much and you should have one for watering your 
seedlings anyway. Dilute fish emulsion to one teaspoon to a gallon and use 
each time you water. Spraying with fish emulsion is a little smelly and may 
change the flavour of the grass to a pleasant mint-like flavour. Dilute the 
chemical fertilizers according to the directions on the packet, and spray 

The nutrients are absorbed through the leaf surface (both sides) and through 
"breathing holes" (stomata) in the leaves. Occasionally spray with plain water 
to redilute unabsorbed nutrients and to clean the plants.

If any plant has an unhealthy or discoloured appearance, make sure the problem 
is not due to insect or disease before assuming a nutrient deficiency. Examine 
the plants carefully, especially the undersides of leaves, along the stem and 
in the soil.

Deficiency signs:

Nitrogen: plant colour is paler than normal. Yellowing of older leaves on the 
main stem followed by yellowing of younger loaves with slow or no growth. 
Yellowing of the leaves will occur after the plant is more than two and a half 
feet tall since they are shielded by the upper leaves or are too far from the 
lights to carry on chlorosynthesis.

Phosphorous: leaves are unnaturally dark green with slow growth. Poor 
flowering and root structure.

Potassium: leaves are unnaturally dark green and curl under the edges. 
Bronzing or yellowing starting on the edges of the older main stem leaves, 
which then turn grey, followed by grey or bronze mottling of the whole leaf. 
Stems are often soft and weak. This is the most common deficiency in indoor 

The following deficiencies are not common; especially if you are using 
fertilizers. If the plants are growing poorly, check the soil pH and drainage. 
If the water stays in a pool and takes more than a minute or so to be 
absorbed, then the soil is not draining properly. Leaves will brown at the 
tips, turn pale or yellow and severely curl.

Calcium: growing tips wither and wilt. Buds may not develop.

Sulphur: young leaves have veins of light green.

Magnesium: older leaves are pale green or yellow, this soon spreads to the 
whole plant.

Iron: young leaves are light green or yellow. Veins are darker green than 
surrounding tissue giving leaves a varicose vein appearance.

Boron: young leaves are constricted and light green.

Zinc: abnormally small leaves with yellow or wrinkled edges. Sometimes 
spotted. Sparse foliage, often having leaves at the top of the plant only.

Manganese: bleached out spots on the leaves.

Chlorine: general yellowing of leaves that turn copper or orange. Roots are 
swollen at the ends.

Molybdenum: young leaves are distorted. Sometimes there is a yellowing of 
leaves in the middle part of the plant.


It is virtually impossible to recognise the gender of marijuana plants until 
they begin to flower. The male plant is usually the taller and matures in 
three to five months. Two weeks prior to flowering it will grow very fast 
(internodes elongate) then shoots will sprout with clusters of small, 
dangling, white, greenish white, yellow or purplish flowers that hang from 
tiny branches along the main stem, on branches at the top of the main stem. 
When mature, the flowers open and a yellow anther protrudes and wind disperses 
the pollen.

The female plant, although shorter, is fuller, with more complex branching and 
often twice as many leaves as the male. Her flower consists of a delicate, 
downy white stigma raised in a "V" sign, which is attached at the base to an 
ovary that looks like a tiny green pod. If fertilized, one seed will develop 
in the ovary. When allowed to grow, the flowers develop into clusters or 
"cones" which are interspersed with small green leaves known as bracts. The 
female is the more desirable plant for marijuana cultivators since it produces 
many more leaves, and is considerably more potent than the male.

Normally, male to female ratio in marijuana is about one to one. Genetic and 
environmental conditions interact to determine gender. A strong light source, 
long photoperiod, abundant nitrogen in early growth and much spacing between 
plants stimulate female development. Poor growing conditions in general, such 
as weak light, low nutrient availability, short or erratic photoperiod and 
crowded conditions will produce more males.

Rotation and Even Growth

The light intensity from artificial light drops dramatically as distance from 
the light source increases. If you don't keep the plants at about the same 
height, the shorter plants will receive less light and consequently will grow 
more slowly than the tall ones. This will compound the problem.

One way to deal with uneven growth is to line the plants up by height and hang 
the light system at an angle corresponding to the line of the plant tops.

If a few of your plants are markedly outgrowing the others, cut the growing 
tip back to the height of the average plant. You may find this emotionally 
difficult, but is all-important to the over-all health of your crop. Cutting 
the top will not hurt it, but will force side branches to develop. Conversely, 
if a few plants are much shorter, raise them by placing them on milk crates or 
bricks. Don't put them on cardboard boxes: They collapse when wet.

Young plants about two weeks old can be cut back. This forces branches to 
develop early and will quickly fill all available horizontal space. It is 
helpful with large pots where there is much space between young plants. 
Growing tips of branches can be cut back to encourage more branching. This 
produces a stout bushy plant, and provides an immediate supply of grass. Don't 
overdo it. Severe pruning can cause plants to develop into males.

The growing tip of the plant (apical meristem) contains an inhibitor that 
prevents the branches (lateral buds) from growing. The further a lateral bud 
is from a growing tip, the less the effect of this inhibitor. This is why some 
species of plants form in the shape of a cone or christmas tree. Under 
artificial light the bottom branches don't receive enough light to grow, even 
though they are far enough from the inhibitor. Once the tip is removed, the 
next highest growing tip will be the source of the inhibitor.

Some growers hate to cut the growing tip. It becomes the biggest and most 
potent cone at harvest time. To save the tip, control height, and force 
branching, bend the top of the stem down in an arc and secure it with string 
or wire twists. This will neutralise the effects of the inhibitor somewhat and 
still maintain a strong growing tip. The string or wire twist should be 
removed after a couple of days so that the stem will not break itself by 
twisting upward to the light source.

The quality and quantity of light emitted by a fluorescent is not uniform 
along the length of the tube. There is more light at the centre than at the 
ends. Female plants require more light than males. She is the more potent 
plant and should be given the best care. Once the plant's sex shows, move the 
males to the ends of the system, leaving the stronger middle light for the 


Many plant functions are regulated by the quantity and quality of light, and 
the length of the photoperiod (daylength). Marijuana is a short day (long 
night) plant. The female produces flowers only when she senses the decrease of 
daylength. In the autumn the shortening day is her signal to flower and 
produce seeds for the next year's crop before winter sets in. Flowering in the 
male does not depend on changes in the photoperiod. It flowers regardless of 
daylength in three to five months, depending on the variety.

Although termed 'short day', it is during the night period that the chemical 
reactions that control flowering occur if given a long enough and 
uninterrupted dark period. The dark period must be constant and at least nine 
hours long for the chemical buildup to be completed. By changing the light 
period to less than 13 hours a day, the female responds by flowering profusely 
in about 2 to 3 weeks. Females grown with a daylength of 16 or more hours may 
flower, but will do so sparsely, and will not develop large flower clusters. 
The longer the photoperiod the more pronounced this effect.

Before flowering, the leaf growth will be very fast. Once flowering begins, 
the plant's energy goes to producing the flowers, and the leaf growth slows. 
With this in mind, you can manipulate the photoperiod for either a 
continuously growing vegetative state, or for flowering and a harvest crop.

The continuous growth system emphasizes leaf growth and a continuous supply of 
gross. You can harvest the first grass, which will give you a buzz or better 
in about two months, and have a steady supply of potent grass after about four 
months. A one by four foot system will supply several joints a day. The grass 
is not quite as potent as the harvest system, but will be of excellent quality 
and will compare favourably with most commercial pot. The system is easy to 
care for and supplies a large amounts of grass over a period of time.

The harvest method produces a crop every 4 to 9 months. The grass is very 
potent and is at least as good as the best commercial pot. Although you may 
gather a few leaves now and then, you'll have to wait until the crop is 
harvested for a large supply. The system should produce a minimum of one ounce 
of pot for each square foot of growing area. Of course, you can always be 
enjoying the produce of the last garden while growing the current one.

Continuous Growth System

Use Vita-Lite, Optima, Wide Spectrum Gro-Lux, or combine Plant-Gro or Gro-Lux 
in a one to one ratio with daylight tubes. The abundance of blue light will 
emphasize leaf growth and not flowering. Do not use traditional lightbulbs. 
The photoperiod should be kept constant at 18 hours of light a day for the 
duration of the garden.

After two months the plants will be stocky and the area filled with foliage. 
At this time the bottom leaves begin to yellow because they are shielded from 
light or are too far away from it to carry out photosynthesis. Pick any leaf 
as soon as it begins to yellow. Green leaves can also be picked sparingly 
along with some of the leaf buds.

Flowers may develop after four months on a few plants and can be picked just 
above the growing tip. New flowers will soon develop. Continue picking the 
flowers until the plant loses its vitality. Females usually will continue to 
grow for more than a year, but may lose their vitality after about 8 or 9 
months. When a plant's health begins to decline, it should be uprooted and new 
plants started in it's place. Seeds can be started or cuttings takey3 inches 
below the growing tip of a healthy plant. Use cuttings only when you have an 
especially fast-growing or potent plant. Root the cuttings directly in the 
soil, using a transplant hormone such as Rootone, or Transplantone. Expect a 
survival rate of 30 to 50 per cent. Do not fertilize cuttings for about two 
weeks. The light system at this time will be quite high, so place the pots on 
some sort of platform. In this way, your garden will be kept in a continuous 
growing state with plants at different stages of growth giving you a constant 
supply of potent grass.

If you decide to start over completely, or close the garden down, adjust the 
photoperiod accordingly and convert to a harvest crop.

Harvest System

Under natural conditions, the female plant adjusts its flowering to the length 
of the growing season. This is generally between 3 and 7 months, depending 
upon region and time of planting. Once the plants go to seed, they usually 
lose their vitality and soon die. Since you will be controlling the flowering 
mechanism, your females can be anywhere between 2 and 9 months old at harvest 
time. The potency of grass in general increases with age as long as the plant 
stays healthy. We have found a happy medium in terms of potency and yield is 
to harvest about every 6 months.

Keep the photoperiod constant at 18 hours of light a day until 6 to 8 weeks 
before you plan to harvest. Then cut the day cycle down to about 13 hours of 
light. In about 2 weeks, the females will begin to flower. Allow the flower 
clusters to grow for another 4 to 6 weeks so that they can develop into the 
large clusters which are by far the most potent part of the plant. Flowers can 
be harvested 2 or 3 times before uprooting the plant. Pick them just above 
their growing tip where they meet the main leaves. New flowers will grow from 
this point giving you a higher yield of top quality grass.

Once the flowers have developed, you might try a sunlamp for an hour or two a 
day at a distance of three feet to force resin to the flowering parts. The 
resin flow is the plants protection against the intense heat and possibly the 
ultra-violet rays. The resin contains the cannabinols (THC) that make you 

There is some discussion between growers about the effect of ultra-violet 
light on resin production. Some insist that it stimulates resin flow, while 
others claim little or no effect. Two things are certain: large amounts of 
ultra-violet can damage the plants, and you can grow high quality grass with 
or without ultra-violet. Another belief is that nitrogen deprivation 
stimulates resin production while others say that a dry medium is most 
important. Nitrogen uptake is minimal in dry soils it really doesn't matter to 
the marijuana grower which is the actual mechanism. Hold watering to a minimum 
and keep the atmosphere as dry as possible during the flowering period. Cut 
holes in your reflectors, or wedge open your cupboard door so that the humid 
air can escape. The dry atmosphere and soil will force more resins onto the 
flowering parts.

After turning down the light cycle, if there is a space between the plants, 
hang traditional bulbs in these gaps. These will stimulate the side branches 
to develop, which will fill all the available space. The output of these 
lights is mostly in the red part of the spectrum which will cause profuse 
flowering. Care should be taken that they are not hung too close to the 
plants, where they may cause burning of the leaves. For a 40 watt bulb, a ten 
inch gap will be quite safe - larger bulbs require more distance. For a more 
even distribution, use several small bulbs rather than one large one. Heat 
given off by a fluorescent and by a more traditional bulb is about equal for 
equal wattages. Heat radiated by a fluorescent is spread out over the length 
of the tube and will not burn the leaves unless left in direct contact for a 
number of hours.

You can expect a minimum yield of about one ounce of pot per square foot of 
growing area. Large pots give fewer but taller and bushier plant. The total 
yield is similar for 6" to 18" pots. 8 to 10 inch pots are a good median size 
for high-yield, high potency grass from a moderate amount of soil. Allowing 
much more than 1 1/2 feet of growing area per plant will cut down on the yield 
of the system.

Temperature and Humidity

Temperature control should be no problem. The plant grows well at room 
temperature (70 to 80 degrees during light hours, 55 to 65 degrees during 
darkness), and will survive in temperatures from 40 to 100 degrees. By the way 
temperatures are in fahrenheit. Centigrades ? I treads on 'em.

Plant growth is closely related to temperature. The rate of photosynthesis 
increases until the temperature reaches about 75 to 85 degrees depending on 
the variety. As the temperature rises above this level, the rate of 
photosynthesis slows, and cannabinol resins develop. During flowering, plants 
grown in high temperatures (85 to 100 degrees) and low humidity will produce 
more resin, while during growth stage plants grow faster at room temperatures 
and medium humidity. For this reason it is a good idea to start your crop so 
that you'll harvest during winter months when the heat is turned on. Heated 
homes have a very dry atmosphere.

Propane catalytic heaters do a very good job of heating, are safe, clean, and 
increase the (O2 content of the air. Electric and natural gas heaters also 
work well. Do not use paraffin or petrol heaters. They do not burn clean, and 
the pollutants may harm the plant.

At high temperatures and humidity, air should be allowed to circulate freely 
throughout the garden. Gardens in small confined spaces such as wardrobes must 
be opened daily or the atmosphere will become stifling and growth rate will 
slow down. Constant air circulation does not seem to be critical with 
marijuana as long as the plant obtains its CO2. If you have a large garden and 
there is no way for air to circulate, place a small fan in the garden.

Carbon Dioxide

Plants take in carbon dioxide (CO2) and release oxygen (O2) during 
photosynthesis while at night, plant cells respire by taking in O2 and 
releasing CO2. The net result is that much more oxygen is produced than is 

Carbon dioxide concentration in the air is very low (about 0.3%). Around large 
cities it is a little higher. Plants can use much more CO2 than is supplied by 
the ordinary atmosphere. In general, the rate of photosynthesis increases in 
proportion to the CO2 content of the air up to about 0.5% as long as there are 
no limiting factors such as inadequate light or water.

Tanks of CO2 can be used to increase the concentration in the air. 
Periodically, disperse the gas above the tops of the plants. CO2 is heavier 
than air and will move slowly downwards.


As you become more familiar with the marijuana plant, you may want to develop 
your own strain by crossing selected plants. Plant seeds from as many strains 
as possible. The growth pattern will vary considerably and you can select one 
male to go to flower and fertilize particular females. Factors for selection 
might be potency, high yield, rate of growth, number of leaves or just pure 
aesthetics. All males except the selected one must be removed before their 
flowers open. Place the selected females around the male plant. Periodically 
shake the male or fan the air about the male's flowers. The pollen will 
disperse in a fine mist over the female flowers. This method should be 
adequate to produce enough viable seeds for your next crop. After a few 
generations you will have your own strain, well-suited to its environment and 
your taste.

Hermaphroditic plants are not unusual with marijuana. Some are genetically 
determined (protogenous) while others are a reaction to a hostile environment 
(most likely the photoperiod). An irregular or prolonged photoperiod can cause 
this. These plants have only female flowers at first. Male flowers appear 
later at the top of the stem and branches. Protogenous hermaphrodites develop 
male and female flowers more uniformly with female flowers above male flowers 
on the same branch.

Hermaphrodism can be used to develop a male-free crop. All male plants must be 
removed before they go to pollen. Collect the male flowers from a 
hermaphrodite when they are a good size but have not yet opened. Store the 
flowers in sealed vials (a glass covered with cling-film is fine). In a few 
days they will open up. Apply the pollen with a fine brush or cotton bud over 
the stigmas (a white 'V'-shaped thing) on another female's flowers. Wait a few 
weeks until the seeds are full and have good colour before harvesting. The 
next generation will be all females or all females and hermaphrodites.

More serious growers can try grafting hops plants to marijuana stalks to 
produce a possible legal plant, using growth hormones such as gibberilic acid 
or mutating polyploids using colchicine, thio-ethers, or other chemicals. 
Methods for these are discussed in the following:

The Cultivator's Hand book of Marijuana by Bill Drake

Super Grass Growers Guide by Mary Jane Superweed (Stone Kingdom)

Bark Leaf- (Summer 1972) - Available from: Church of the Tree of Life, 451 
Columbus Ave., San Fransisco, California 94133

Hop seeds can be obtained from various Real Ale and other brewing societies.

Curing Your Grass

All leaves must be thoroughly dried for comfortable smoking and full potency. 
The THC in fresh grass is mostly present in the form of non-psychoactive 
tetrahydrocannabinolic acid. Upon drying, the acid is converted into THC by 

Single leaves can be dried by placing them in a pan on a hot radiator or in 
the bright summer sun (a little scarce in Britain). A quicker method is to 
pre-heat your oven to 150 degrees. Place a single layer of leaves in a pan, 
turn off the oven and place them inside. In five to fifteen minutes the leaves 
will be dry and will crumble easily between your fingers. If not dry, remove 
the grass from the oven and repeat the pre-heating and drying. You can also 
put them in single layers, propped up on chopsticks or somesuch, on full for a 
few minutes.

Another method is to hang the plants intact, upside down above a radiator, or 
in the sun. Some of the resin contained in the stem will ooze onto the leaves. 
It will take 3 to 10 days to dry completely, depending on the humidity and 
other factors. The potency of the grass varies in different parts of the 
plant. Potency increases from the bottom to the top. The small leaves on the 
branches are more potent than the large leaves on the main stem, and the 
flowering parts are the most potent of all. The female plant is always 
considerably more potent than the male. The best part is the flowering top of 
a female plant, and the worst (which is really not bad at all) is the large 
leaves on the bottom of the stem of the male.

Large Systems

With the price of grass what is is today, some of you may want to undertake 
growing on a large scale. To get the highest yield for the smallest investment 
requires a conservation of light and soil. During the first few months of 
growth the plants need much less soil and garden space than they do when they 
are older. You can design a system that will produce large, mature plants to 
harvest every month, by having in each system six sub-systems at different 
growth stages. For example, 50 plants need a minimum of 50 square feet of 
growing room when mature, but during the first month they will fit inside of 2 
square feet. During the second month they will need approximately six square 

If the plants are started in large pots, the pots themselves take up most of 
the room. This wastes light and soil on empty space. By rotating the plants 
into bigger gardens and successively larger pots, you can get the highest 
yield from a minimum investment. Transplanting to larger pots is easy. The 
root systems quickly fill the pots and can be removed intact with all the soil 
adhering to the roots. This is best done by turning the pot upside down and 
placing the plant stem between the middle and index finger, then tapping 
gently on the bottom of the pot with a something you can get a good swing 
with. The plant will just pop out of the pot.

For smaller gardens, use industrial type light fixtures. Larger systems should 
have single tubes, evenly spaced, and mounted on plywood. Big systems can get 
very heavy because of the weight of the transformers. It is more convenient 
and cheaper if you don't buy fixtures, but only the end sockets and 

Mount the transformers separately and run extension wires to the light system. 
With only the sockets and tubes mounted on the plywood, the lights are easily 
raised and there is less weight for the walls and ceiling to support.

For larger systems it is better to use very high output tubes. These have a 
higher intensity than regular fluorescent tubes, and their effective distance 
is so much more that fewer tubes are needed and they can be placed further 
apart. The closer the tubes are placed to each other, the less efficient the 
lights are. Light from one tube may just hit the neighbouring tube and be 

It is well worth it to grow all-female crops either by taking cutting or by 
hybridising hermaphrodites when building these systems.

A three garden/two month system is given as an example, but the idea can be 
simply extended to a six garden, one month system.

A. The first two months - Plants are started in sixty-five 4" pots within 
approximately eight square feet. Using 20 watts of light per square foot (PSF) 
you are using 160 watts from two 8 foot tubes (72-80 watts each)

B. The third and fourth months - Transplant to 6-8" pots. The system uses 
approximately 32 square feet. Using 20 watts PSF, you are drawing 640 watts 
from eight 8 foot tubes or 3 VHO tubes (215 watts each).

C. Fifth and sixth months - Option to transplant to 10-14" pots within 
approximately seventy square feet. Using 20 watts PSF you are drawing 1400 
watts from seventeen 8 foot tubes or 7 VHO tubes.

Maintenance and Restarting

Periodically you should clean the tubes and reflectors to remove accumulated 
dust and grime or else the amount of visible light produced will be cut. Most 
fluorescents lose about 30% of their effective power after about a year of 
use. They should be replaced when dark rings appear at the tube ends. Replace 
traditional bulbs after five hundred light hours.

Don't smoke around the plants. Heavy concentrations of tobacco smoke are 
harmful to marijuana, especially to the male plant.

Visiting your garden will be good for both you and your plants. You'll provide 
them with CO2, and they'll provide you with oxygen rich air.

To start a new crop, it is best to begin with fresh soil, especially if you 
had been using a system with smaller pots and frequent fertilization. A 
buildup of toxic salts can harm new plants. To salvage large quantities of 
soil, remove the top two-inch layer of soil, which contain most of the harmful 
salts. Treat the rest of the soil with a trace element mixture, add fertilizer 
and fresh soil. Thoroughly mix and repot in clean sterile pots.

Insects and Diseases

The indoor garden is an ideal habitat for plant pests. There should be little 
chance of a problem if you start with sterilized soil and keep the garden 
segregated from other plants. Before planting, make sure that none of your 
other plants are infested with anything.

Over-watering often causes plants to lose their vitality, develop drooping and 
spotted leaves. Sometimes they succumb to fungus or stem rot. Stem rot appears 
as a brown or black discolouration at the base of the stem and is soft and 
mushy to the touch. To correct this allow the soil to dry more before watering 
and be sure to water around the stem, and not on it. Wipe fungus and stem rot 
off the plants and treat them with a fungicide.

Spider mites and false spider mites are the most common and destructive pests. 
Both species are barely visible to the naked eye, and are usually well 
established before you discover them. First indications are chlorotic or 
whitish leaves or bronzing of the edges along the veins. Webs form at the 
internodes of the stem and along the branches. the cyclamen mites are oval, 
tan to black, or semi-transparent. Eggs are white and laid along veins on the 
undersides of the leaves. False spider mites are bright red. You can usually 
see mites as tiny specks if you look up at the light system from the underside 
of the leaves.

Mites are difficult to eliminate. If only a few plants are infested, remove 
and destroy them immediately. The other plants must be treated with an 
insecticide such as Malathion. Malathion is an organic phosphate which is 
effective but very toxic. However, it breaks down chemically and is 
metabolised into harmless chemicals after 14 days. Do not harvest before at 
least 14 days have gone by from when you spray.

When using Malathion, add one-half teaspoon of mild detergent (not soap) to 
each gallon of the solution. The detergent will help spread the insecticide 
more thoroughly over the plant. If the plants are large, spray the whole 
plant, especially the undersides of leaves and soil surfaces. The spray kills 
the adults, but is ineffective against their eggs. Repeat this application 
weekly for the next few weeks and you'll catch the young mites after they've 
hatched but before they've laid eggs.

Be extremely cautious when using insecticides. You are going to smoke or 
ingest the plant, and don't want to poison yourself along with the insects. 
There are a number of insecticides such as Diazinon and Malathion on the 
market which are safe when used as directed. The label will list the 
precautions and give time periods for degrading before consumption. If you 
have a pest problem which we haven't described, your local nurseryman or woman 
should be able to describe the proper treatment ("Me tomatoes are poorly, 
Guv."). Smaller plants should be dunked in a bucket of the solution, which is 
the surest way to kill the pests.

If the plants are not heavily infested and you object to Malathion, wash them 
is soapy water, one quarter pound of pure soap (such as Ivory Flakes) to one 
gallon of tepid water. Mix the soap thoroughly into the water and, without 
letting the soil fall out of the pot (cover it with newspaper, foil, or 
cling-film) invert the plant and dip it several times. Let it drip dry, then 
rinse in clear water. The dunking procedure may have to be used repeatedly 
since it is almost impossible to wash all the mites off at once.

Mealy Bugs are larger (about 3/16") and white. They are usually found on the 
underside of the leaves or near the stem. The eggs are contained in a white 
cotton-like or waxy material at the stem internodes or leaf axils. The 
infested plants will need more frequent watering and will have a weakened 

Aphids ("little green junkies") are about 1/16" long and are green, red, pink 
or black. They have roundish bodies and antennae and long legs. Some species 
have wings. They congregate on the underside of leaves, especially young, 
juicy, tender leaves. Growth becomes stunted and leaves are curled or 
distorted. Mealy bugs and Aphids are not as common a problem as mites, and are 
easier to deal with. Remove infested plants from the garden. Dunk them in a 
solution of 1/4lb of soap per gallon of tepid water. Use a cloth and go over 
the underside of the leaves with a cotton bud to remove the pests. When using 
Malathion, one application to the whole crop is usually enough to prevent 
these pests from recurring.

Whiteflies are white (obviously) and about 1/16" long. The young appear as 
green or yellow scales. Usually you don't see whiteflies until the plants are 
moved. Then all the adults take off and it looks like a small snowstorm. Plant 
growth is slow and leaves are often sticky with the insects excretions. A 
thorough spraying with Malathion will usually get rid of whiteflies.

For winged insects in general, spray-on insecticides using Pyrethium are 
convenient. They are not as effective as Malathion, but the toxic effects of 
the spray usually wears off after a day or two.

For further information on pest control:

The Natural Way to Pest-Free Gardening by Jack Krammer, New York City - 
Charles Scribner's and Sons - 1972

Organic Way to Plant Protection - Emmaus P. A., Rodale Books Inc. 1966

Outdoor Cultivation

The Outdoor Garden

Marijuana is usually an annual plant. This means that the life expectancy of 
the plant is based on the length of the growing season. The longer the growing 
season, the better the quality, and the larger the quantity, of your crop.

Marijuana should be planted outdoors two weeks after the last threat of frost, 
and should be harvested before the first autumn frost. You can find the 
approximate dates for your area by consulting experienced growers, nurserymen 
or gardening magazines.

Some fields are warmer than others in the same area, because of the way they 
lie and prevailing wind conditions. Northern slopes are the coldest and 
receive the least light. Southern slopes receive the most light and are the 
warmest. Eastern slopes are shaded in the afternoon, and western slopes are 
shaded in the morning. The steeper the slope, the more pronounced is the 


Naturally you will want to be careful where you grow your crops. Make sure 
that there is no visible access from a road or well-used path. Since marijuana 
may grow to twenty feet (depending upon variety, length of growing season, 
soil conditions and light) it might be best to intersperse it with other tall 
plants such as staked tomatoes, corn and sunflowers. Find out what kind of 
fields the growers in your area are using. An area that grows over with tall 
weeds will most likely grow good grass if you start the marijuana before the 
weeds come up.

An ideal planting area is an open clearing in a woodland not frequented by the 
general public. The clearing should be located so that the plants get at least 
eight hours a day of direct sunlight. Other possibilities are clearings on 
mountains, depressions in fields, or clearings in giant fields not under 
aerial supervision.

Remember that grass cannot be easily moved once it is planted and that it will 
probably remain there for at least four months.

There have been a number of incidents of hunters discovering patches of 
marijuana and reporting it to the law. Try not to plant on land frequented by 

Growing Conditions

Marijuana likes as much sun as it can get, and a moist but will-drained soil. 
It does not do well in swampy and clay soils. The soil should be high in 
nitrogen and potassium and medium in phosphorous. The pH should be at least 
5.5; it will do better at 6.5 - 7.5.

At least two months before planting you should test and adjust the soil. 
Needed nutrients should be added to the soil at least a month before planting 
for the best results. This gives the fertilizer time to dissolve.

The pH can be raised by adding ground limestone, dolomite limestone, hydrated 
lime, marl or ground sea shells.

Sandy and loamy soil can be conditioned just by adding fertilizer and making 
pH adjustments. Nurseries carry several different fertilizer mixes. Select one 
closest to your needs as determined by the soil tests. Some Agricultural 
Colleges will do these tests for you.

Turn and loosen the soil and break up large clods of earth. Clear all ground 
near the spot where you are planting. Add fertilizer and work it into the 
ground. If it rains frequently in your area, the fertilizer will soak into the 
ground by itself. If no, water the area so that is dissolves.

Clay soils can be adjusted by working in straw, manure, leaves and stalks, 
compost, kitty litter or construction sand. These help to keep the soil loose 
and aerated.

Swampy areas can be adjusted by building planting mounds about one foot high 
and one foot across. The mounds will have better drainage than the surrounding 
soil and they will not become waterlogged.

If the soil is very bad and you are only growing a small patch there are other 
ways of changing soil conditions:

1. Buy topsoil and place it in holes where you are going to plant. This is 
only for small gardens as it can be expensive and laborious.

2. Dig a hole one foot deep and one foot wide. Fill in six inches deep with 
manure or compost sprinkled with lime. Fill the remainder of the hole with 

3. Use a self-contained planting pot as described in Transplanting.

To get a longer season, you can start seeds indoors and transplant them 
outside after the threat of frost has passed. This is especially helpful in 
the Northern US, NZ South Island and Sunny Britain, where the growing season 
is short. Seeds can be started as much as two months before the season begins. 
There are several methods for starting seeds:

1. Planting Pellets. These are one and a half inch pellets which expand when 
they come in contact with water. They come in several pH levels. Get either a 
6.5 or a 7. These are the easiest units for starting seedlings. Just follow 
the directions on the package. They should be used only if you are planning to 
plant within a month.

2. Planting Pots. These pots are made of compressed peat moss. They come in 
all sizes, but the best is probably 2" X 2". Fill with one of the soil 
mixtures described in Indoor Cultivation. Try to prepare from the same soil to 
which the plants will be moved later. Plant several seeds in each pot and thin 
to one plant per pot. When you are ready to transplant outdoors, just dig a 
hole and put the planting pot in it. The pot will disintegrate when the root 
system gets big enough.

Tin cans and toilet rolls can be used instead of planting pots. Make sure the 
cans have drainage holes in them and that the sides are scored so that the 
roots can grow out of them. Do not use aluminium cans. They won't disintegrate 
and the plants roots will be trapped.

3. Seed Trays. Seed trays are the most economical way of starting large 
numbers of seedlings, but the plant's roots may be damaged when you 
transplant. Fill plastic planting trays with one of the mixtures described in 
Indoor Cultivation. Sow one seed every inch, but thin to one plant every two 
inches when they begin to interfere with each other. When you are ready to 
transplant them, slice the soil into squares and plant outdoors. Treat to 
prevent shock.

4. Self-contained Soil Unit. This method should be used only when the soil is 
unsuitable for adjustment. Use large cans. Fill with 3 inches of vermiculite 
or perlite mixed with a slow release fertilizer, and then fill it the rest of 
the way with a mixture of soil, perlite, vermiculite and sand. A mixture of 
soil, manure, humus, and potash can also be used. Holes should be punched in 
the bottom of the can for drainage. When you are ready to plant outdoors, put 
the can in a hole in the ground.

Use the same methods in cultivating these plants indoors as you would if they 
were to remain indoors permanently. If you are planning to keep the plants 
indoors for more than a month, they have to be introduced to the sun's 
intensity gradually. The plants need at least 40 watts of fluorescent light 
per square foot to avoid shock. This will also build up the sugar supply to 
help the plant avoid transplant shock. Other ways of avoiding shock are by 
putting trays of seedlings outdoors for a few hours a day for a few days in a 
partially sunny area before they are transplanted.

If you have indoor plants already growing, you can clip shoots about 3 inches 
from the growing tip and put each of them in one of the containers mentioned 
previously. They will quickly develop roots and start growing into new plants, 
especially if a little hormone rooting powder is used. This is a good method 
of obtaining high quality transplant stock.

The night before you transplant, water both the plant and the soil to which 
you are going to transplant. Also, to prevent shock, transplants should be 
made to and from soils with the same chemical or textural characteristics 
(unless you are using the self-contained soil unit method).

Plant on a cloudy day or late in the afternoon. Never plant or transplant on a 
bright sunny day. The sun's energy is too much for the plants to take at 


Marijuana is very adaptable and can be grown as close together as fifteen 
inches between rows with plants every six inches. Plants grown this way will 
not be as bushy as ones grown further apart. Spacing rows 24 inches or so 
apart with plants about every fifteen inches seems to be the most efficient 
method of utilising the area. Plants will be bushy, tall and easy to harvest.

In order to catch as much sun as possible, rows should run north to south, 
perpendicular to the course of the sun.


Marijuana cannot grow (or live) in an environment in which it cannot find 
water. It sends down a tap root which may grow to be half as long as the plant 
itself. Often marijuana can be found near the banks of streams in drier areas. 
Cultivated fields supply enough water naturally through irrigation. Some 
growers in remote areas use portable water pumps. Digging a hole in which the 
pump can be run and stored will muffle the sound and keep the machinery in 
better condition. Make sure not to overwater your plants. Keep the ground 
moist, but not waterlogged.


Grass is at its most vulnerable stage right after germination. The seedlings 
have a tendency to fall over in rain and wind. Usually they can overcome their 
crises. If you have started seedlings indoors, you will be over the critical 
stage when you come to transplant.

1 1/2 to 2 months after germination you will have to decide wether to clip the 
tops to make the plant bush or to let it grow straight and let it bush on its 
own. Letting the grass grow straight will allow it to produce more weed, but 
bushy plants are harder to detect. If you want the plants to bush, cut the 
main stem about three inches from the top when the plant is about 2 to 3 feet 
tall. Very long secondary branches should also be cut. The clipped tops can be 
dried and smoked, or they can be rooted. This process should be repeated if 
the plant starts growing tall again.

If you have prepared the soil properly you will not need to fertilize much (if 
at all) during the growing season. It is a good idea to check the plants 
periodically. If the plants seem to have any deficiencies, add the proper 
nutrients. If the plants are not growing quickly, make sure they do not have 
too much competition for sunlight. If the plants are too close together, they 
can be trimmed or pulled. If crowding is not the problem, pH probably is. Test 
the pH and make the proper adjustments.

Flowering and Harvesting

The plants will begin to flower late august or early september. When total 
daylight hours fall below 13-15 hours a day (depending on variety) the plants' 
reproductive cycle is triggered.

If you have a long growing season and secure conditions, pick the flower buds 
off. The plant will send up new buds. As long as the plant continues to send 
them up you can clip them off. Some say this increases the potency, it surely 
increases the yield.

Many farmers throughout the world bend the stem of each plant sharply at a 
point way down. The plants are left this way for several days after which the 
sun-dried tops are harvested. The bend cuts off circulation between the upper 
and lower parts of the plant. Cannabinol resins cannot flow back past the 
bend. Furthermore the shock of bending apparently drives the resins in the 
portion of the stem just above the bend into the flower tops.

Another technique is to bend the tops more or less horizontally so that they 
snap, but do not crease. The tops draw some liquids from the base of the 
plant, but not enough to stop them wilting within 10 days. People who use this 
method claim it increases potency significantly.

In many places, most notably in India and Pakistan, farmers make the practice 
of destroying all male plants as soon as their gender becomes determinable. 
This is done to prevent their maturation and the pollination of the females. 
It has been found that a loss of cannabinol resin often occurs in the female 
shortly after pollination.

If your growing season is short (as it tends to be in the UK), let the plants 
flower and harvest them before the frost. Some claim that marijuana is at its 
potency peak at this time. Others claim that marijuana is at its most potent 
state about 2 to 10 days after it starts to flower. Due to the difficulty of 
obtaining the necessary licenses from Government departments, very little real 
research has been done in this field.

If you wait until the seeds mature and drop off the plant, you may have a crop 
next year without planting. It is almost impossible to get rid of marijuana 
once it has become indigenous to the area. The American Federal Government in 
Iowa and Kansas have gone so far as to suggest that farmers napalm or 
herbicide their fields.

Marijuana can be harvested by pulling up the whole plant, including the roots, 
by chopping it off about 1/2 way up the stem, or by picking each plant 

Depending on cultivation methods and environmental conditions you should 
harvest about 1000-5000lbs per acre (43,000 square feet).

Recently, a crop of two acres worth of "the best grass we've ever seen" was 
found by the New Zealand police force. Right in the centre of Wellington. Too 
bad they got caught ....

Plant Pests Outdoors

Several different kinds of insects like to eat, chew or suck on marijuana. 
Several methods can be used to get rid of them. Companion planting of garlic, 
onions, chives, savoury, thyme and marigolds keep some insects away. 
Inter-crop one of these with your marijuana. (Interesting fact #247: Marijuana 
was once planted hash plants around their crops of cabbages as hash scares off 
the cabbage white butterfly. This practice has been since discontinued.)

Predatory insects such as the praying mantis, ladybirds, and lacewings eat 
insects which attack marijuana. They can be purchased from commercial 
hatcheries. Do not spray plants with insecticides of any description when 
predators are present. You'll wipe them out too.

Botanical repellents, naturally occurring insecticides which have not been 
concentrated, can be used in spray form. They are not persistent, that is, 
they do not build up in living tissue, but they are poisons. Pyrethiums and 
Rotenone are the ones used most often. Take care if using Rotenone near a 
river; people will get suspicious when all the fish drop dead.

Your plants are more likely to be attacked by foraging animals and hippies. 
Little can be done about the latter except choosing a better location, but 
blood meal placed on the ground near the garden will keep deer away. Chimes, 
bells and scarecrows keep foraging animals at bay, but attract the hippies. A 
stout fence is the only reliable answer.